Tap Water Quality in Lake Eyre, SA
Postcode 5733 · Supplied by SA Water via Marree
Quality Score
About Lake Eyre
Lake Eyre is a suburb in South Australia, Australia (postcode 5733). It falls within the SA Water area. Neighbouring suburbs include Kalamurina, Muloorina, Anna Creek, Clayton Station.
Most residents own their home with a mortgage (0%), while 0% own outright, while 0% rent. The median household income is $0 per year.
Tap water in Lake Eyre is supplied by SA Water. The suburb receives water via the Marree supply zone.
Water quality summary
Based on 2025 water quality reports, Lake Eyre achieves a WaterScore of 9.1 out of 10, rated excellent overall. Water hardness measures 38 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 0.05, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.25 mg/L, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.1 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 242 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.3 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Kalamurina , Muloorina , Anna Creek
Census Data
Suburb snapshot
Population
Median Age
Median Income
Recommended filters for Lake Eyre
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for Lake Eyre — removes chlorine taste and odour.
ZeroWater
23-Cup Dispenser (incl. TDS Meter)
4.3 · 27,123 ratings on Amazon
A reliable 23-cup dispenser (incl. tds meter) suitable for Lake Eyre's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for Lake Eyre — removes chlorine taste and odour.
Comparison
How Lake Eyre compares
Compared to South Australia and national averages
| Metric | Lake Eyre | SA Avg | National Avg |
|---|---|---|---|
| Hardness | 38 mg/L | 119.3 mg/L | 85.1 mg/L |
| pH | 0.05 | 3.2 | 8.4 |
| Fluoride | 0.25 mg/L | 0.5 mg/L | 0.7 mg/L |
| Chlorine | 1.1 mg/L | — | — |
| Turbidity | 0.3 NTU | 0.1 NTU | 0.4 NTU |
| TDS | 242 mg/L | 341.5 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 96 | mg/L | No limit | Measured |
| Aluminium | 0.006 | mg/L | < 0.2 | Good |
| Calcium | 13.6 | mg/L | No limit | Measured |
| Chloride | 76 | mg/L | < 250 | Good |
| Free Chlorine | 1.1 | mg/L | < 5 | Good |
| Total Chlorine | 1.2 | mg/L | < 5 | Good |
| Colour | 1 | HU | < 15 | Good |
| Copper | 0.0081 | mg/L | < 2 | Good |
| E. coli | 0 | MPN/100mL | < 0 | Compliant |
| Fluoride | 0.25 | mg/L | < 1.5 | Good |
| Hardness | 38 | PPM or mg/L | < 200 | Good |
| Iron | 0.028 | mg/L | < 0.3 | Good |
| Lead | 0.0011 | mg/L | < 0.01 | Good |
| Magnesium | 0.9 | mg/L | No limit | Measured |
| Manganese | 0.001 | mg/L | < 0.1 | Good |
| Nitrate | 0.15 | mg/L | < 50 | Good |
| pH | 0.05 | µg/L | 6.5 – 8.5 | Outside range |
| Sodium | 76.4 | mg/L | < 180 | Good |
| Sulfate | 0.6 | mg/L | < 500 | Good |
| Total Dissolved Solids | 242 | mg/L | < 600 | Good |
| Turbidity | 0.3 | NTU | < 5 | Good |
Safety
Safety assessment
Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 0.05 µg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (38 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Outside Range
pH Level
pH of 0.05 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.25 mg/L. Below the recommended range.
Chlorine
Disinfection
Chlorine measured at 1.1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Reduce Chlorine Taste
Lake Eyre's chlorine level is 1.1 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.
Soft Water Advantage
Lake Eyre's water is soft at 38 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.25 mg/L in Lake Eyre. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Slightly Acidic Water
pH measures 0.05 in Lake Eyre, which is slightly acidic. Running the tap for 30 seconds before drinking can flush any metals that dissolve more readily in acidic water.
Get water quality alerts
We'll email you when Lake Eyre's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Lake Eyre?
How hard is the water in Lake Eyre?
What water utility supplies Lake Eyre?
Does Lake Eyre water have fluoride?
What is the water quality score for Lake Eyre?
What is the population of Lake Eyre?
Supplier
Water utility
- Utility
- SA Water
- Supply Zone
- Marree
- Data Source
- SA Water — water quality performance results november 2025
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.1 and 10.0
Utility reports average the grid — not your home
Lake Eyre's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Adelaide and SA
In-depth articles on the water supply that serves Lake Eyre
Related
Explore more
Related pages for Lake Eyre, SA
Is tap water safe?
Safety assessment
Water hardness
38 mg/L
Best water filter
Filter recommendations
South Australia water quality
State coverage
SA Water
Water utility
Compare with Kalamurina
Lake Eyre vs Kalamurina
Compare with Muloorina
Lake Eyre vs Muloorina
Compare with Anna Creek
Lake Eyre vs Anna Creek
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.