Tap Water Quality in Lower Light, SA
Postcode 5501 · Supplied by SA Water via Barossa
Quality Score
About Lower Light
Lower Light is a suburb of 203 residents in South Australia (postcode 5501). The median age is 45. It falls within the SA Water area. Neighbouring suburbs include Two Wells, Dublin, Calomba, Long Plains.
Most residents own outright (55%), while 22% own their home with a mortgage, while 17% rent. The median household income is $80,184 per year. The top countries of birth for residents are United Kingdom (48%) and Sri Lanka (14%).
Tap water in Lower Light is supplied by SA Water. The suburb receives water via the Barossa supply zone.
Water quality summary
Based on 2025 water quality reports, Lower Light achieves a WaterScore of 8.8 out of 10, rated excellent overall. Water hardness measures 138 mg/L, classified as hard. Residents may notice limescale buildup on appliances and fixtures. The pH level is 0.05, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.6 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.6 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 391 mg/L, considered moderate against the ADWG guideline of 600 mg/L. Turbidity is 0.25 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Lower Light
Products matched to your water profile
iSpring
RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)
4.6 · 13,756 ratings on Amazon
Ideal for Lower Light — reduces hardness from 138 mg/L, removes chlorine taste and odour.
YARNA
Capacitive Electronic Water Descaler (Whole House)
4 · 538 ratings on Amazon
Ideal for Lower Light — helps reduce limescale buildup from hard water (138 mg/L) without removing hardness minerals.
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for Lower Light — removes chlorine taste and odour.
Comparison
How Lower Light compares
Compared to South Australia and national averages
| Metric | Lower Light | SA Avg | National Avg |
|---|---|---|---|
| Hardness | 138 mg/L | 119.3 mg/L | 85.1 mg/L |
| pH | 0.05 | 3.2 | 8.4 |
| Fluoride | 0.6 mg/L | 0.5 mg/L | 0.7 mg/L |
| Chlorine | 0.6 mg/L | — | — |
| Turbidity | 0.25 NTU | 0.1 NTU | 0.4 NTU |
| TDS | 391 mg/L | 341.5 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 65 | mg/L | No limit | Measured |
| Aluminium | 0.019 | mg/L | < 0.2 | Good |
| Calcium | 27.9 | mg/L | No limit | Measured |
| Chloride | 127 | mg/L | < 250 | Good |
| Free Chlorine | 0.6 | mg/L | < 5 | Good |
| Total Chlorine | 0.7 | mg/L | < 5 | Good |
| Colour | 1 | HU | < 15 | Good |
| Copper | 0.0157 | mg/L | < 2 | Good |
| E. coli | 0 | cfu/100mL | < 0 | Compliant |
| Fluoride | 0.6 | mg/L | < 1.5 | Good |
| Hardness | 138 | PPM or mg/L | < 200 | Good |
| Iron | 0.0828 | mg/L | < 0.3 | Good |
| Lead | 0.0005 | mg/L | < 0.01 | Good |
| Magnesium | 16.7 | mg/L | No limit | Measured |
| Manganese | 0.0041 | mg/L | < 0.1 | Good |
| Nitrate | 0.18 | mg/L | < 50 | Good |
| pH | 0.05 | µg/L | 6.5 – 8.5 | Outside range |
| Sodium | 73.7 | mg/L | < 180 | Good |
| Sulfate | 59.2 | mg/L | < 500 | Good |
| Total Dissolved Solids | 391 | mg/L | < 600 | Good |
| Turbidity | 0.25 | NTU | < 5 | Good |
Safety
Safety assessment
Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 0.05 µg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Hard (138 mg/L)
Water Hardness
Your water is classified as hard. Expect noticeable limescale on heating elements, showerheads, and taps. Soap and shampoo may not lather as freely, requiring more product. Some residents report drier skin or hair. Periodic descaling of kettles and hot water systems is recommended to maintain efficiency.
Outside Range
pH Level
pH of 0.05 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.6 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 0.6 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Lower Light measures 0.6 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Watch for Limescale
Lower Light has hard water at 138 mg/L. Wipe taps and showerheads periodically with vinegar to prevent limescale buildup on fixtures.
Fluoride in Your Water
Fluoride measures 0.6 mg/L in Lower Light. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Consider a Filter for TDS
Total dissolved solids measure 391 mg/L. A reverse osmosis filter can reduce dissolved minerals if you prefer a cleaner taste in drinking water.
Slightly Acidic Water
pH measures 0.05 in Lower Light, which is slightly acidic. Running the tap for 30 seconds before drinking can flush any metals that dissolve more readily in acidic water.
Get water quality alerts
We'll email you when Lower Light's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Lower Light?
How hard is the water in Lower Light?
What water utility supplies Lower Light?
Does Lower Light water have fluoride?
What is the water quality score for Lower Light?
What is the population of Lower Light?
Supplier
Water utility
- Utility
- SA Water
- Supply Zone
- Barossa
- Data Source
- SA Water — water quality performance results november 2025
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 7.8 and 9.8
Utility reports average the grid — not your home
Lower Light's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Adelaide and SA
In-depth articles on the water supply that serves Lower Light
Related
Explore more
Related pages for Lower Light, SA
Is tap water safe?
Safety assessment
Water hardness
138 mg/L
Best water filter
Filter recommendations
South Australia water quality
State coverage
SA Water
Water utility
Compare with Two Wells
Lower Light vs Two Wells
Compare with Dublin
Lower Light vs Dublin
Compare with Calomba
Lower Light vs Calomba
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.