Tap Water Quality in Mole Creek, TAS
Postcode 7304 · Supplied by TasWater via Mole Creek
Quality Score
About Mole Creek
Mole Creek is a suburb of 528 residents in Tasmania (postcode 7304). The median age is 51. It falls within the TasWater area. Neighbouring suburbs include Mount Roland, Merseylea, Railton, Sunnyside.
Most residents own outright (58%), while 26% own their home with a mortgage, while 10% rent. The median household income is $55,432 per year. The top countries of birth for residents are United Kingdom (51%), New Zealand (10%), and Netherlands (8%).
Tap water in Mole Creek is supplied by TasWater. The suburb receives water via the Mole Creek supply zone.
Water quality summary
Based on recent water quality reports, Mole Creek achieves a WaterScore of 9.8 out of 10, rated excellent overall. Water hardness measures 15.75 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.270588, which is within the ADWG guideline range of 6.5–8.5. Chlorine, used for disinfection, measures 0.961618 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 41 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.219118 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Mount Roland , Merseylea , Railton
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Mole Creek
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for Mole Creek — removes chlorine taste and odour.
Waterdrop
TSA Under-Sink Filter (Fluoride + PFAS)
4.4 · 2,237 ratings on Amazon
A reliable tsa under-sink filter (fluoride + pfas) suitable for Mole Creek's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for Mole Creek — removes chlorine taste and odour.
Comparison
How Mole Creek compares
Compared to Tasmania and national averages
| Metric | Mole Creek | TAS Avg | National Avg |
|---|---|---|---|
| Hardness | 15.75 mg/L | 34.8 mg/L | 85.1 mg/L |
| pH | 7.270588 | 7.4 | 8.4 |
| Fluoride | — | 0.9 mg/L | 0.7 mg/L |
| Chlorine | 0.961618 mg/L | — | — |
| Turbidity | 0.219118 NTU | 0.3 NTU | 0.4 NTU |
| TDS | 41 mg/L | 93.3 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 14.083333 | mg/L | No limit | Measured |
| Aluminium | 0.01 | mg/L | < 0.2 | Good |
| Ammonia | 0.002167 | mg/L | No limit | Measured |
| Antimony | 0.001 | mg/L | No limit | Measured |
| Arsenic | 0.001 | mg/L | No limit | Measured |
| Cadmium | 0.0002 | mg/L | No limit | Measured |
| Calcium | 4.35 | mg/L | No limit | Measured |
| Chloride | 8 | mg/L | < 250 | Good |
| Free Chlorine | 0.961618 | mg/L | < 5 | Good |
| Total Chlorine | 1.016429 | mg/L | < 5 | Good |
| Chromium | 0.001 | mg/L | No limit | Measured |
| Colour | 2.083333 | Pt-Co | < 15 | Good |
| Conductivity | 61.083333 | uS/cm | No limit | Measured |
| Copper | 0.00225 | mg/L | < 2 | Good |
| Cyanide | 0.005 | mg/L | No limit | Measured |
| E. coli | 0 | MPN/100ml | < 0 | Compliant |
| Hardness | 15.75 | mg/L | < 200 | Good |
| Iron | 0.01 | mg/L | < 0.3 | Good |
| Lead | 0.001 | mg/L | < 0.01 | Good |
| Magnesium | 1.25 | mg/L | No limit | Measured |
| Manganese | 0.001 | mg/L | < 0.1 | Good |
| Mercury | 0.0001 | mg/L | No limit | Measured |
| Nickel | 0.001 | mg/L | No limit | Measured |
| Nitrate | 0.072167 | mg/L | < 50 | Good |
| Nitrite | 0.002 | mg/L | No limit | Measured |
| pH | 7.270588 | pH units | 6.5 – 8.5 | Normal |
| Sodium | 4.2 | mg/L | < 180 | Good |
| Sulfate | 2 | mg/L | < 500 | Good |
| Temperature | 11.419118 | degrees C | No limit | Measured |
| Total Coliforms | 0 | MPN/100ml | < 0 | Compliant |
| Total Dissolved Solids | 41 | mg/L | < 600 | Good |
| Trihalomethanes | 0.0085 | mg/L | < 0.25 | Good |
| Turbidity | 0.219118 | NTU | < 5 | Good |
| Zinc | 0.0025 | mg/L | No limit | Measured |
Safety
Safety assessment
Based on 34 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (15.75 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.270588 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Data unavailable
Fluoride
Fluoride data is not currently available for Mole Creek.
Chlorine
Disinfection
Chlorine measured at 0.961618 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Mole Creek measures 0.961618 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Mole Creek's water is soft at 15.75 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Flush After Absence
If your home has been unoccupied for several days, run the kitchen tap for 30 seconds before drinking. This clears stale water that has been sitting in pipes.
Get water quality alerts
We'll email you when Mole Creek's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Mole Creek?
How hard is the water in Mole Creek?
What water utility supplies Mole Creek?
Does Mole Creek water have fluoride?
What is the water quality score for Mole Creek?
What is the population of Mole Creek?
Supplier
Water utility
- Utility
- TasWater
- Supply Zone
- Mole Creek
- Data Source
- TasWater — Mole Creek
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.8 and 10.0
Utility reports average the grid — not your home
Mole Creek's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Launceston and northern Tasmania
In-depth articles on the water supply that serves Mole Creek
Related
Explore more
Related pages for Mole Creek, TAS
Is tap water safe?
Safety assessment
Water hardness
15.75 mg/L
Best water filter
Filter recommendations
Tasmania water quality
State coverage
TasWater
Water utility
Compare with Mount Roland
Mole Creek vs Mount Roland
Compare with Merseylea
Mole Creek vs Merseylea
Compare with Railton
Mole Creek vs Railton
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from TasWater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.