Tap Water Quality in Mount Eba, SA
Postcode 5720 · Supplied by SA Water via Morgan/Northern
Quality Score
About Mount Eba
Mount Eba is a suburb in South Australia, Australia (postcode 5720). It falls within the SA Water area. Neighbouring suburbs include Millers Creek, Mcdouall Peak, Mount Vivian, Pimba.
Tap water in Mount Eba is supplied by SA Water. The suburb receives water via the Morgan/Northern supply zone.
Water quality summary
Based on 2025 water quality reports, Mount Eba achieves a WaterScore of 9.0 out of 10, rated excellent overall. Water hardness measures 77 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The pH level is 8.7, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.52 mg/L, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.1 mg/L — well within the ADWG guideline of 5 mg/L. Total dissolved solids (TDS) measure 275 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Millers Creek , Mcdouall Peak , Mount Vivian
Recommended filters for Mount Eba
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Mount Eba's water profile.
ZeroWater
2.8L 5-Stage Jug (PFAS + Fluoride + Lead, IAPMO Certified)
4.2 · 5,315 ratings on Amazon
A reliable 2.8l 5-stage jug (pfas + fluoride + lead, iapmo certified) suitable for Mount Eba's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
A reliable 8.5l stainless steel gravity system suitable for Mount Eba's water profile.
Comparison
How Mount Eba compares
Compared to South Australia and national averages
| Metric | Mount Eba | SA Avg | National Avg |
|---|---|---|---|
| Hardness | 77 mg/L | 119.3 mg/L | 85.1 mg/L |
| pH | 8.7 | 3.2 | 8.4 |
| Fluoride | 0.52 mg/L | 0.5 mg/L | 0.7 mg/L |
| Chlorine | 0.1 mg/L | — | — |
| Turbidity | 0.1 NTU | 0.1 NTU | 0.4 NTU |
| TDS | 275 mg/L | 341.5 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 64 | mg/L | No limit | Measured |
| Aluminium | 0.019 | mg/L | < 0.2 | Good |
| Calcium | 15.3 | mg/L | No limit | Measured |
| Chloride | 75 | mg/L | < 250 | Good |
| Free Chlorine | 0.1 | mg/L | < 5 | Good |
| Total Chlorine | 2.8 | mg/L | < 5 | Good |
| Colour | 1 | HU | < 15 | Good |
| Copper | 0.0067 | mg/L | < 2 | Good |
| E. coli | 0 | cfu/100mL | < 0 | Compliant |
| Fluoride | 0.52 | mg/L | < 1.5 | Good |
| Hardness | 77 | PPM or mg/L | < 200 | Good |
| Iron | 0.0098 | mg/L | < 0.3 | Good |
| Lead | 0.0002 | mg/L | < 0.01 | Good |
| Magnesium | 9.49 | mg/L | No limit | Measured |
| Manganese | 0.0061 | mg/L | < 0.1 | Good |
| Nitrate | 1.089 | mg/L | < 50 | Good |
| pH | 8.7 | pH units | 6.5 – 8.5 | Outside range |
| Sodium | 60.4 | mg/L | < 180 | Good |
| Sulfate | 47.8 | mg/L | < 500 | Good |
| Total Dissolved Solids | 275 | mg/L | < 600 | Good |
| Turbidity | 0.1 | NTU | < 5 | Good |
Safety
Safety assessment
Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 8.7 pH units. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Moderately hard (77 mg/L)
Water Hardness
Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
Outside Range
pH Level
pH of 8.7 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.52 mg/L. Below the recommended range.
Chlorine
Disinfection
Chlorine measured at 0.1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Mount Eba measures 0.1 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Mount Eba's water is moderately hard at 77 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.52 mg/L in Mount Eba. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Alkaline Water
pH measures 8.7 in Mount Eba, which is above the ADWG guideline range. This may cause a slightly bitter taste but is generally not a practical concern.
Get water quality alerts
We'll email you when Mount Eba's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Mount Eba?
How hard is the water in Mount Eba?
What water utility supplies Mount Eba?
Does Mount Eba water have fluoride?
What is the water quality score for Mount Eba?
Supplier
Water utility
- Utility
- SA Water
- Supply Zone
- Morgan/Northern
- Data Source
- SA Water — water quality performance results november 2025
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.0 and 10.0
Utility reports average the grid — not your home
Mount Eba's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Adelaide and SA
In-depth articles on the water supply that serves Mount Eba
Related
Explore more
Related pages for Mount Eba, SA
Is tap water safe?
Safety assessment
Water hardness
77 mg/L
Best water filter
Filter recommendations
South Australia water quality
State coverage
SA Water
Water utility
Compare with Millers Creek
Mount Eba vs Millers Creek
Compare with Mcdouall Peak
Mount Eba vs Mcdouall Peak
Compare with Mount Vivian
Mount Eba vs Mount Vivian
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.