Tap Water Quality in Mount Jagged, SA
Postcode 5211 · Supplied by SA Water via Myponga (supplying Victor Harbor and the Fleurieu)
Quality Score
About Mount Jagged
Mount Jagged is a suburb of 155 residents in South Australia (postcode 5211). The median age is 41. It falls within the SA Water area. Neighbouring suburbs include Back Valley, Inman Valley, Waitpinga, Willow Creek.
Most residents own their home with a mortgage (54%), while 40% own outright, while 6% rent. The median household income is $93,600 per year. The top countries of birth for residents are United Kingdom (44%), Netherlands (31%), and New Zealand (25%).
Tap water in Mount Jagged is supplied by SA Water. The suburb receives water via the Myponga (supplying Victor Harbor and the Fleurieu) supply zone.
Water quality summary
Based on 2025 water quality reports, Mount Jagged achieves a WaterScore of 8.7 out of 10, rated excellent overall. Water hardness measures 138 mg/L, classified as hard. Residents may notice limescale buildup on appliances and fixtures. The pH level is 8.6, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.7 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.1 mg/L — well within the ADWG guideline of 5 mg/L. Total dissolved solids (TDS) measure 480 mg/L, considered moderate against the ADWG guideline of 600 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Back Valley , Inman Valley , Waitpinga
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Mount Jagged
Products matched to your water profile
iSpring
RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)
4.6 · 13,756 ratings on Amazon
Ideal for Mount Jagged — reduces hardness from 138 mg/L.
YARNA
Capacitive Electronic Water Descaler (Whole House)
4 · 538 ratings on Amazon
Ideal for Mount Jagged — helps reduce limescale buildup from hard water (138 mg/L) without removing hardness minerals.
Berkey
Royal 3.25 Gal (with Fluoride Filters)
4.5 · 1,628 ratings on Amazon
A reliable royal 3.25 gal (with fluoride filters) suitable for Mount Jagged's water profile.
Comparison
How Mount Jagged compares
Compared to South Australia and national averages
| Metric | Mount Jagged | SA Avg | National Avg |
|---|---|---|---|
| Hardness | 138 mg/L | 119.3 mg/L | 85.1 mg/L |
| pH | 8.6 | 3.2 | 8.4 |
| Fluoride | 0.7 mg/L | 0.5 mg/L | 0.7 mg/L |
| Chlorine | 0.1 mg/L | — | — |
| Turbidity | 0.1 NTU | 0.1 NTU | 0.4 NTU |
| TDS | 480 mg/L | 341.5 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 76 | mg/L | No limit | Measured |
| Aluminium | 0.041 | mg/L | < 0.2 | Good |
| Calcium | 29.6 | mg/L | No limit | Measured |
| Chloride | 156 | mg/L | < 250 | Good |
| Free Chlorine | 0.1 | mg/L | < 5 | Good |
| Total Chlorine | 3.2 | mg/L | < 5 | Good |
| Colour | 2 | HU | < 15 | Good |
| Copper | 0.0122 | mg/L | < 2 | Good |
| E. coli | 0 | cfu/100mL | < 0 | Compliant |
| Fluoride | 0.7 | mg/L | < 1.5 | Good |
| Hardness | 138 | PPM or mg/L | < 200 | Good |
| Iron | 0.0039 | mg/L | < 0.3 | Good |
| Lead | 0.0001 | mg/L | < 0.01 | Good |
| Magnesium | 15.7 | mg/L | No limit | Measured |
| Manganese | 0.002 | mg/L | < 0.1 | Good |
| Nitrate | 1.01 | mg/L | < 50 | Good |
| pH | 8.6 | pH units | 6.5 – 8.5 | Outside range |
| Sodium | 103.2 | mg/L | < 180 | Good |
| Sulfate | 70.8 | mg/L | < 500 | Good |
| Total Dissolved Solids | 480 | mg/L | < 600 | Good |
| Turbidity | 0.1 | NTU | < 5 | Good |
Safety
Safety assessment
Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 8.6 pH units. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Hard (138 mg/L)
Water Hardness
Your water is classified as hard. Expect noticeable limescale on heating elements, showerheads, and taps. Soap and shampoo may not lather as freely, requiring more product. Some residents report drier skin or hair. Periodic descaling of kettles and hot water systems is recommended to maintain efficiency.
Outside Range
pH Level
pH of 8.6 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.7 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 0.1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Mount Jagged measures 0.1 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Watch for Limescale
Mount Jagged has hard water at 138 mg/L. Wipe taps and showerheads periodically with vinegar to prevent limescale buildup on fixtures.
Fluoride in Your Water
Fluoride measures 0.7 mg/L in Mount Jagged. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Consider a Filter for TDS
Total dissolved solids measure 480 mg/L. A reverse osmosis filter can reduce dissolved minerals if you prefer a cleaner taste in drinking water.
Alkaline Water
pH measures 8.6 in Mount Jagged, which is above the ADWG guideline range. This may cause a slightly bitter taste but is generally not a practical concern.
Get water quality alerts
We'll email you when Mount Jagged's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Mount Jagged?
How hard is the water in Mount Jagged?
What water utility supplies Mount Jagged?
Does Mount Jagged water have fluoride?
What is the water quality score for Mount Jagged?
What is the population of Mount Jagged?
Supplier
Water utility
- Utility
- SA Water
- Supply Zone
- Myponga (supplying Victor Harbor and the Fleurieu)
- Data Source
- SA Water — water quality performance results november 2025
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 7.7 and 9.7
Utility reports average the grid — not your home
Mount Jagged's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Adelaide and SA
In-depth articles on the water supply that serves Mount Jagged
Related
Explore more
Related pages for Mount Jagged, SA
Is tap water safe?
Safety assessment
Water hardness
138 mg/L
Best water filter
Filter recommendations
South Australia water quality
State coverage
SA Water
Water utility
Compare with Back Valley
Mount Jagged vs Back Valley
Compare with Inman Valley
Mount Jagged vs Inman Valley
Compare with Waitpinga
Mount Jagged vs Waitpinga
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.