Tap Water Quality in Mount Mcintyre, SA
Postcode 5279 · Supplied by SA Water via Mt Burr
Quality Score
About Mount Mcintyre
Mount Mcintyre is a suburb of 70 residents in South Australia (postcode 5279). The median age is 50. It falls within the SA Water area. Neighbouring suburbs include Koorine, Short, Trihi, Wattle Range East.
Most residents own outright (50%), while 19% rent, while 9% own their home with a mortgage. The median household income is $95,316 per year.
Tap water in Mount Mcintyre is supplied by SA Water. The suburb receives water via the Mt Burr supply zone.
Water quality summary
Based on 2025 water quality reports, Mount Mcintyre achieves a WaterScore of 9.4 out of 10, rated excellent overall. Water hardness measures 285 mg/L, classified as very hard. Residents may notice limescale buildup on appliances and fixtures. The water is fluoridated at 0.3 mg/L, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.9 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 438 mg/L, considered moderate against the ADWG guideline of 600 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
285/200 mg/L
139% above South Australia avg
255% above national avg
Recommended filters for Mount Mcintyre
Products matched to your water profile
iSpring
RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)
4.6 · 13,756 ratings on Amazon
Ideal for Mount Mcintyre — reduces hardness from 285 mg/L, removes chlorine taste and odour.
AO Smith
Salt-Free Whole House Descaler (6yr / 600,000 Gal)
4.3 · 1,517 ratings on Amazon
Ideal for Mount Mcintyre — helps reduce limescale buildup from hard water (285 mg/L) without removing hardness minerals.
Waterdrop
TSA Under-Sink Carbon Filter (Chlorine + Taste)
4.4 · 2,237 ratings on Amazon
Ideal for Mount Mcintyre — removes chlorine taste and odour.
Comparison
How Mount Mcintyre compares
Compared to South Australia and national averages
| Metric | Mount Mcintyre | SA Avg | National Avg |
|---|---|---|---|
| Hardness | 285 mg/L | 119.3 mg/L | 80.3 mg/L |
| pH | — | 8.6 | 7.8 |
| Fluoride | 0.3 mg/L | 0.5 mg/L | 0.7 mg/L |
| Chlorine | 0.9 mg/L | — | — |
| Turbidity | 0.1 NTU | 0.1 NTU | 0.4 NTU |
| TDS | 438 mg/L | 341.5 mg/L | 267.4 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 280 | mg/L | No limit | Measured |
| Aluminium | 0.003 | mg/L | < 0.2 | Good |
| Calcium | 83.9 | mg/L | No limit | Measured |
| Chloride | 81 | mg/L | < 250 | Good |
| Free Chlorine | 0.9 | mg/L | < 5 | Good |
| Total Chlorine | 0.8 | mg/L | < 5 | Good |
| Colour | 1 | HU | < 15 | Good |
| Copper | 0.0155 | mg/L | < 2 | Good |
| E. coli | 0 | cfu/100mL | < 0 | Compliant |
| Fluoride | 0.3 | mg/L | < 1.5 | Good |
| Hardness | 285 | PPM or mg/L | < 200 | Exceeds |
| Iron | 0.0016 | mg/L | < 0.3 | Good |
| Lead | 0.0008 | mg/L | < 0.01 | Good |
| Magnesium | 18.4 | mg/L | No limit | Measured |
| Manganese | 0.0001 | mg/L | < 0.1 | Good |
| Nitrate | 3.99 | mg/L | < 50 | Good |
| Sodium | 46.7 | mg/L | < 180 | Good |
| Sulfate | 8.3 | mg/L | < 500 | Good |
| Total Dissolved Solids | 438 | mg/L | < 600 | Good |
| Turbidity | 0.1 | NTU | < 5 | Good |
Safety
Safety assessment
Of 20 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: Hardness at 285 PPM or mg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Very hard (285 mg/L)
Water Hardness
Your water is very hard, meaning significant limescale buildup is likely on appliances, fixtures, and heating elements. Soap will struggle to lather, and you may notice dry skin or dull hair after washing. Regular descaling of kettles, dishwashers, and hot water systems is strongly recommended.
Data unavailable
pH Level
pH data is not currently available for Mount Mcintyre.
Fluoridated
Fluoride
Fluoride at 0.3 mg/L. Below the recommended range.
Chlorine
Disinfection
Chlorine measured at 0.9 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Mount Mcintyre measures 0.9 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Descale Appliances Regularly
With very hard water at 285 mg/L, descale your kettle, showerhead, and hot water system every few months using white vinegar to maintain efficiency.
Fluoride in Your Water
Fluoride measures 0.3 mg/L in Mount Mcintyre. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Consider a Filter for TDS
Total dissolved solids measure 438 mg/L. A reverse osmosis filter can reduce dissolved minerals if you prefer a cleaner taste in drinking water.
Get water quality alerts
We'll email you when Mount Mcintyre's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Mount Mcintyre?
How hard is the water in Mount Mcintyre?
What water utility supplies Mount Mcintyre?
Does Mount Mcintyre water have fluoride?
What is the water quality score for Mount Mcintyre?
What is the population of Mount Mcintyre?
Supplier
Water utility
- Utility
- SA Water
- Supply Zone
- Mt Burr
- Data Source
- SA Water — water quality performance results november 2025
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.4 and 10.0
Utility reports average the grid — not your home
Mount Mcintyre's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Adelaide and SA
In-depth articles on the water supply that serves Mount Mcintyre
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Mount Mcintyre, SA [Data set]. Compiled from SA Water data (2025 report). https://waterscore.com.au/water-quality/mount-mcintyre-sa/
Embed
Add Mount Mcintyre, SA water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Mount Mcintyre, SA
Is tap water safe?
Safety assessment
Water hardness
285 mg/L
Best water filter
Filter recommendations
South Australia water quality
State coverage
SA Water
Water utility
Compare with Mount Burr
Mount Mcintyre vs Mount Burr
Compare with Millicent
Mount Mcintyre vs Millicent
Compare with Wattle Range
Mount Mcintyre vs Wattle Range
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.