Tap Water Quality in Mount Osmond, SA
Postcode 5064 · Supplied by SA Water via Central metro Adelaide suburbs
Quality Score
About Mount Osmond
Mount Osmond is a suburb of 464 residents in South Australia (postcode 5064). The median age is 46. It falls within the SA Water area. Neighbouring suburbs include Leawood Gardens, Glen Osmond, Beaumont, Waterfall Gully.
Most residents own their home with a mortgage (50%), while 41% own outright, while 5% rent. The median household income is $144,404 per year. The top countries of birth for residents are United Kingdom (33%), China (10%), and India (9%).
Tap water in Mount Osmond is supplied by SA Water. The suburb receives water via the Central metro Adelaide suburbs supply zone.
Water quality summary
Based on 2025 water quality reports, Mount Osmond achieves a WaterScore of 9.6 out of 10, rated excellent overall. Water hardness measures 97 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The water is fluoridated at 0.4 mg/L, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.3 mg/L — well within the ADWG guideline of 5 mg/L. Total dissolved solids (TDS) measure 300 mg/L, considered moderate against the ADWG guideline of 600 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Leawood Gardens , Glen Osmond , Beaumont
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Mount Osmond
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Mount Osmond's water profile.
ZeroWater
2.8L 5-Stage Jug (IAPMO Certified: PFOA/PFOS + Lead)
4.2 · 5,315 ratings on Amazon
A reliable 2.8l 5-stage jug (iapmo certified: pfoa/pfos + lead) suitable for Mount Osmond's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
A reliable 8.5l stainless steel gravity system suitable for Mount Osmond's water profile.
Comparison
How Mount Osmond compares
Compared to South Australia and national averages
| Metric | Mount Osmond | SA Avg | National Avg |
|---|---|---|---|
| Hardness | 97 mg/L | 119.3 mg/L | 80.3 mg/L |
| pH | — | 8.6 | 7.8 |
| Fluoride | 0.4 mg/L | 0.5 mg/L | 0.7 mg/L |
| Chlorine | 0.3 mg/L | — | — |
| Turbidity | 0.1 NTU | 0.1 NTU | 0.4 NTU |
| TDS | 300 mg/L | 341.5 mg/L | 267.4 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 62 | mg/L | No limit | Measured |
| Aluminium | 0.031 | mg/L | < 0.2 | Good |
| Calcium | 20.6 | mg/L | No limit | Measured |
| Chloride | 89 | mg/L | < 250 | Good |
| Free Chlorine | 0.3 | mg/L | < 5 | Good |
| Total Chlorine | 0.4 | mg/L | < 5 | Good |
| Colour | 1 | HU | < 15 | Good |
| Copper | 0.0319 | mg/L | < 2 | Good |
| E. coli | 0 | cfu/100mL | < 0 | Compliant |
| Fluoride | 0.4 | mg/L | < 1.5 | Good |
| Hardness | 97 | PPM or mg/L | < 200 | Good |
| Iron | 0.0225 | mg/L | < 0.3 | Good |
| Lead | 0.0002 | mg/L | < 0.01 | Good |
| Magnesium | 11.06 | mg/L | No limit | Measured |
| Manganese | 0.0015 | mg/L | < 0.1 | Good |
| Nitrate | 0.46 | mg/L | < 50 | Good |
| Sodium | 53.5 | mg/L | < 180 | Good |
| Sulfate | 36.3 | mg/L | < 500 | Good |
| Total Dissolved Solids | 300 | mg/L | < 600 | Good |
| Turbidity | 0.1 | NTU | < 5 | Good |
Safety
Safety assessment
Based on 20 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Moderately hard (97 mg/L)
Water Hardness
Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
Data unavailable
pH Level
pH data is not currently available for Mount Osmond.
Fluoridated
Fluoride
Fluoride at 0.4 mg/L. Below the recommended range.
Chlorine
Disinfection
Chlorine measured at 0.3 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Mount Osmond measures 0.3 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Mount Osmond's water is moderately hard at 97 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.4 mg/L in Mount Osmond. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Mount Osmond's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Mount Osmond?
How hard is the water in Mount Osmond?
What water utility supplies Mount Osmond?
Does Mount Osmond water have fluoride?
What is the water quality score for Mount Osmond?
What is the population of Mount Osmond?
Supplier
Water utility
- Utility
- SA Water
- Supply Zone
- Central metro Adelaide suburbs
- Data Source
- SA Water — water quality performance results november 2025
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.6 and 10.0
Utility reports average the grid — not your home
Mount Osmond's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Adelaide and SA
In-depth articles on the water supply that serves Mount Osmond
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Mount Osmond, SA [Data set]. Compiled from SA Water data (2025 report). https://waterscore.com.au/water-quality/mount-osmond-sa/
Embed
Add Mount Osmond, SA water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Mount Osmond, SA
Is tap water safe?
Safety assessment
Water hardness
97 mg/L
Best water filter
Filter recommendations
South Australia water quality
State coverage
SA Water
Water utility
Compare with Stonyfell
Mount Osmond vs Stonyfell
Compare with Erindale
Mount Osmond vs Erindale
Compare with Crafers West
Mount Osmond vs Crafers West
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.