As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Mt Gambier, SA

Supplied by SA Water via Mt Gambier

Current data · 2025 report

Quality Score

Share this page Twitter Facebook LinkedIn

About Mt Gambier

Mt Gambier is a suburb of 25,591 residents in South Australia. The median age is 41. It falls within the SA Water area. Neighbouring suburbs include Aberfoyle Park, Abminga Station, Adelaide, Adelaide Airport.

Most residents rent (33%), while 32% own their home with a mortgage, while 31% own outright. The median household income is $62,244 per year. The top countries of birth for residents are United Kingdom (26%), New Zealand (7%), and Thailand (6%).

Tap water in Mt Gambier is supplied by SA Water. The suburb receives water via the Mt Gambier supply zone.

Water quality summary

Based on 2025 water quality reports, Mt Gambier achieves a WaterScore of 8.8 out of 10, rated excellent overall. Water hardness measures 183 mg/L, classified as hard. Residents may notice limescale buildup on appliances and fixtures. The pH level is 0.05, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.9 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.1 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 363 mg/L, considered moderate against the ADWG guideline of 600 mg/L. Turbidity is 0.13 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Aberfoyle Park , Abminga Station , Adelaide

Suburb snapshot

Population

25,591

Median Age

41 years

Median Income

$1,197 /week

Owner-occupied

63%

Recommended filters for Mt Gambier

Products matched to your water profile

Our top pick
iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

iSpring

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

Premium Matched to Mt Gambier's water

Ideal for Mt Gambier — reduces hardness from 183 mg/L, removes chlorine taste and odour.

AO Smith Whole House Salt Free Water Descaler Single-Stage 600,000 Gallon

AO Smith

Salt-Free Whole House Descaler (6yr / 600,000 Gal)

4.3 · 1,517 ratings on Amazon

Premium Matched to Mt Gambier's water

Ideal for Mt Gambier — helps reduce limescale buildup from hard water (183 mg/L) without removing hardness minerals.

BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Mt Gambier's water

Ideal for Mt Gambier — removes chlorine taste and odour.

How Mt Gambier compares

Compared to South Australia and national averages

Metric Mt Gambier SA Avg National Avg
Hardness 183 mg/L 119.3 mg/L 85.1 mg/L
pH 0.05 3.2 8.4
Fluoride 0.9 mg/L 0.5 mg/L 0.7 mg/L
Chlorine 1.1 mg/L
Turbidity 0.13 NTU 0.1 NTU 0.4 NTU
TDS 363 mg/L 341.5 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 172 mg/L No limit Measured
Aluminium 0.001 mg/L < 0.2 Good
Calcium 42 mg/L No limit Measured
Chloride 80 mg/L < 250 Good
Free Chlorine 1.1 mg/L < 5 Good
Total Chlorine 1.1 mg/L < 5 Good
Colour 1 HU < 15 Good
Copper 0.0159 mg/L < 2 Good
E. coli 0 cfu/100mL < 0 Compliant
Fluoride 0.9 mg/L < 1.5 Good
Hardness 183 PPM or mg/L < 200 Near limit
Iron 0.0009 mg/L < 0.3 Good
Lead 0.0004 mg/L < 0.01 Good
Magnesium 18.8 mg/L No limit Measured
Manganese 0.0001 mg/L < 0.1 Good
Nitrate 13.87 mg/L < 50 Good
pH 0.05 µg/L 6.5 – 8.5 Outside range
Sodium 53.6 mg/L < 180 Good
Sulfate 14.6 mg/L < 500 Good
Total Dissolved Solids 363 mg/L < 600 Good
Turbidity 0.13 NTU < 5 Good

Safety assessment

Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 0.05 µg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Hard (183 mg/L)

Water Hardness

Your water is classified as hard. Expect noticeable limescale on heating elements, showerheads, and taps. Soap and shampoo may not lather as freely, requiring more product. Some residents report drier skin or hair. Periodic descaling of kettles and hot water systems is recommended to maintain efficiency.

Outside Range

pH Level

pH of 0.05 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.9 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 1.1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Reduce Chlorine Taste

Mt Gambier's chlorine level is 1.1 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.

Watch for Limescale

Mt Gambier has hard water at 183 mg/L. Wipe taps and showerheads periodically with vinegar to prevent limescale buildup on fixtures.

Fluoride in Your Water

Fluoride measures 0.9 mg/L in Mt Gambier. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Consider a Filter for TDS

Total dissolved solids measure 363 mg/L. A reverse osmosis filter can reduce dissolved minerals if you prefer a cleaner taste in drinking water.

Slightly Acidic Water

pH measures 0.05 in Mt Gambier, which is slightly acidic. Running the tap for 30 seconds before drinking can flush any metals that dissolve more readily in acidic water.

Get water quality alerts

We'll email you when Mt Gambier's water data is updated.

Frequently asked questions

Is tap water safe to drink in Mt Gambier?
Yes, tap water in Mt Gambier is generally safe to drink. It scores 8.8 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by SA Water. Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 0.05 µg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Mt Gambier?
Water hardness in Mt Gambier is 183 mg/L, classified as hard. Your water is classified as hard. Expect noticeable limescale on heating elements, showerheads, and taps. Soap and shampoo may not lather as freely, requiring more product. Some residents report drier skin or hair. Periodic descaling of kettles and hot water systems is recommended to maintain efficiency.
What water utility supplies Mt Gambier?
Mt Gambier is supplied by SA Water.
Does Mt Gambier water have fluoride?
Yes, water in Mt Gambier is fluoridated, with a fluoride level of 0.9 mg/L. This is within the recommended range for dental health.
What is the water quality score for Mt Gambier?
Mt Gambier has a WaterScore of 8.8 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Mt Gambier?
The population of Mt Gambier, SA is 25,591 according to the 2021 Australian Census. The median age of residents is 41 years.

Water utility

Utility
SA Water
Supply Zone
Mt Gambier
Data Source
SA Water — water quality performance results november 2025

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 7.8 and 9.8

Utility reports average the grid — not your home

Mt Gambier's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Adelaide and SA

In-depth articles on the water supply that serves Mt Gambier

Explore more

Related pages for Mt Gambier, SA

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

Hard water · 183 mg/L — limescale risk

iSpring · ★ 4.6 on Amazon

Stop the scale →