Tap Water Quality in Pelican Point, SA
Postcode 5291 · Supplied by SA Water via Port MacDonnell
Quality Score
About Pelican Point
Pelican Point is a suburb of 81 residents in South Australia (postcode 5291). The median age is 63. It falls within the SA Water area. Neighbouring suburbs include Allendale East, Blackfellows Caves, Burrungule, Cape Douglas.
Most residents own outright (58%), while 20% own their home with a mortgage, while 13% rent. The median household income is $47,424 per year. The top countries of birth for residents are United Kingdom (50%).
Tap water in Pelican Point is supplied by SA Water. The suburb receives water via the Port MacDonnell supply zone.
Water quality summary
Based on 2025 water quality reports, Pelican Point achieves a WaterScore of 8.8 out of 10, rated excellent overall. Water hardness measures 22 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 0.05, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.8 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.1 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 693 mg/L, considered elevated against the ADWG guideline of 600 mg/L. Turbidity is 0.14 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Allendale East , Blackfellows Caves , Burrungule
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Pelican Point
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for Pelican Point — removes chlorine taste and odour.
ZeroWater
2.8L 5-Stage Jug (PFAS + Fluoride + Lead, IAPMO Certified)
4.2 · 5,315 ratings on Amazon
A reliable 2.8l 5-stage jug (pfas + fluoride + lead, iapmo certified) suitable for Pelican Point's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for Pelican Point — removes chlorine taste and odour.
Comparison
How Pelican Point compares
Compared to South Australia and national averages
| Metric | Pelican Point | SA Avg | National Avg |
|---|---|---|---|
| Hardness | 22 mg/L | 119.3 mg/L | 85.1 mg/L |
| pH | 0.05 | 3.2 | 8.4 |
| Fluoride | 0.8 mg/L | 0.5 mg/L | 0.7 mg/L |
| Chlorine | 1.1 mg/L | — | — |
| Turbidity | 0.14 NTU | 0.1 NTU | 0.4 NTU |
| TDS | 693 mg/L | 341.5 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 354 | mg/L | No limit | Measured |
| Aluminium | 0.002 | mg/L | < 0.2 | Good |
| Calcium | 2.36 | mg/L | No limit | Measured |
| Chloride | 166 | mg/L | < 250 | Good |
| Free Chlorine | 1.1 | mg/L | < 5 | Good |
| Total Chlorine | 0.9 | mg/L | < 5 | Good |
| Colour | 1 | HU | < 15 | Good |
| Copper | 0.035 | mg/L | < 2 | Good |
| E. coli | 0 | cfu/100mL | < 0 | Compliant |
| Fluoride | 0.8 | mg/L | < 1.5 | Good |
| Hardness | 22 | PPM or mg/L | < 200 | Good |
| Iron | 0.0043 | mg/L | < 0.3 | Good |
| Lead | 0.0004 | mg/L | < 0.01 | Good |
| Magnesium | 3.96 | mg/L | No limit | Measured |
| Manganese | 0.001 | mg/L | < 0.1 | Good |
| Nitrate | 0.13 | mg/L | < 50 | Good |
| pH | 0.05 | µg/L | 6.5 – 8.5 | Outside range |
| Sodium | 253 | mg/L | < 180 | Exceeds |
| Sulfate | 22.1 | mg/L | < 500 | Good |
| Total Dissolved Solids | 693 | mg/L | < 600 | Exceeds |
| Turbidity | 0.14 | NTU | < 5 | Good |
Safety
Safety assessment
Of 21 parameters tested, several exceed Australian Drinking Water Guidelines: pH (0.05 µg/L), Sodium (253 mg/L), Total Dissolved Solids (693 mg/L). E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (22 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Outside Range
pH Level
pH of 0.05 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.8 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 1.1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Reduce Chlorine Taste
Pelican Point's chlorine level is 1.1 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.
Soft Water Advantage
Pelican Point's water is soft at 22 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.8 mg/L in Pelican Point. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Consider a Filter for TDS
Total dissolved solids measure 693 mg/L. A reverse osmosis filter can reduce dissolved minerals if you prefer a cleaner taste in drinking water.
Slightly Acidic Water
pH measures 0.05 in Pelican Point, which is slightly acidic. Running the tap for 30 seconds before drinking can flush any metals that dissolve more readily in acidic water.
Get water quality alerts
We'll email you when Pelican Point's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Pelican Point?
How hard is the water in Pelican Point?
What water utility supplies Pelican Point?
Does Pelican Point water have fluoride?
What is the water quality score for Pelican Point?
What is the population of Pelican Point?
Supplier
Water utility
- Utility
- SA Water
- Supply Zone
- Port MacDonnell
- Data Source
- SA Water — water quality performance results november 2025
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 7.8 and 9.8
Utility reports average the grid — not your home
Pelican Point's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Adelaide and SA
In-depth articles on the water supply that serves Pelican Point
Related
Explore more
Related pages for Pelican Point, SA
Is tap water safe?
Safety assessment
Water hardness
22 mg/L
Best water filter
Filter recommendations
South Australia water quality
State coverage
SA Water
Water utility
Compare with Allendale East
Pelican Point vs Allendale East
Compare with Blackfellows Caves
Pelican Point vs Blackfellows Caves
Compare with Burrungule
Pelican Point vs Burrungule
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.