Tap Water Quality in Richmond, NSW
Postcode 2753 · Supplied by Sydney Water via North Richmond
Quality Score
About Richmond
Richmond is a suburb of 5,418 residents in New South Wales (postcode 2753). The median age is 43. It falls within the Sydney Water area. Neighbouring suburbs include Richmond Lowlands, Agnes Banks, North Richmond, Tennyson.
Most residents rent (44%), while 30% own outright, while 21% own their home with a mortgage. The median household income is $70,356 per year. The top countries of birth for residents are United Kingdom (22%), India (13%), and Nepal (9%).
Tap water in Richmond is supplied by Sydney Water. The suburb receives water via the North Richmond supply zone.
Water quality summary
Based on 2024-25 water quality reports, Richmond achieves a WaterScore of 9.6 out of 10, rated excellent overall. Water hardness measures 39.1 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.8, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 1.03 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.13 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 145 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.15 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Richmond Lowlands , Agnes Banks , North Richmond
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Richmond
Products matched to your water profile
ZeroWater
2.8L 5-Stage Jug (PFAS + Fluoride + Lead, IAPMO Certified)
4.2 · 5,315 ratings on Amazon
Ideal for Richmond — removes fluoride (currently 1.03 mg/L).
Geekpure
5-Stage Under-Sink RO (75 GPD)
4.4 · 400 ratings on Amazon
Ideal for Richmond — removes fluoride (currently 1.03 mg/L), removes chlorine taste and odour.
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for Richmond — removes chlorine taste and odour.
Comparison
How Richmond compares
Compared to New South Wales and national averages
| Metric | Richmond | NSW Avg | National Avg |
|---|---|---|---|
| Hardness | 39.1 mg/L | 45.9 mg/L | 85.1 mg/L |
| pH | 7.8 | 7.7 | 8.4 |
| Fluoride | 1.03 mg/L | 1 mg/L | 0.7 mg/L |
| Chlorine | 1.13 mg/L | — | — |
| Turbidity | 0.15 NTU | 0.2 NTU | 0.4 NTU |
| TDS | 145 mg/L | 116.3 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Iron | 0.018 | mg/L | < 0.3 | Good |
| Aluminium | 0.01 | mg/L | < 0.2 | Good |
| Manganese | 0.0005 | mg/L | < 0.1 | Good |
| Copper | 0.014 | mg/L | < 2 | Good |
| Zinc | 0.004 | mg/L | No limit | Measured |
| Ammonia | 0.001 | mg/L | No limit | Measured |
| Turbidity | 0.15 | NTU | < 5 | Good |
| Colour | 2 | HU | < 15 | Good |
| Dissolved Oxygen | 85.1 | % saturation | No limit | Measured |
| Total Dissolved Solids | 145 | mg/L | < 600 | Good |
| Sulfate | 10.4 | mg/L | < 500 | Good |
| Hardness | 39.1 | mg/L | < 200 | Good |
| pH | 7.8 | pH units | 6.5 – 8.5 | Normal |
| Temperature | 20.9 | degrees C | No limit | Measured |
| E. coli | 0 | orgs/100 mL | < 0 | Compliant |
| Free Chlorine | 1.13 | mg/L | < 5 | Good |
| Monochloramine | 0.07 | mg/L | < 3 | Good |
| Fluoride | 1.03 | mg/L | < 1.5 | Good |
| Trihalomethanes | 0.04 | mg/L | < 0.25 | Good |
| Ndma | 0.0001 | mg/L | No limit | Measured |
| Chloride | 0.004 | mg/L | < 250 | Good |
| Pfos Pfhxs | 0.0028 | µg/L | No limit | Measured |
| PFOA | 0.0009 | µg/L | < 0.56 | Good |
Safety
Safety assessment
Based on 23 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (39.1 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.8 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 1.03 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 1.13 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Reduce Chlorine Taste
Richmond's chlorine level is 1.13 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.
Soft Water Advantage
Richmond's water is soft at 39.1 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 1.03 mg/L in Richmond. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Richmond's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Richmond?
How hard is the water in Richmond?
What water utility supplies Richmond?
Does Richmond water have fluoride?
What is the water quality score for Richmond?
What is the population of Richmond?
Supplier
Water utility
- Utility
- Sydney Water
- Supply Zone
- North Richmond
- Data Source
- Sydney Water — quarterly north richmond q2 202425, quarterly north richmond q3 202425, quarterly north richmond q4 202425
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.6 and 10.0
Utility reports average the grid — not your home
Richmond's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Sydney
In-depth articles on the water supply that serves Richmond
Related
Explore more
Related pages for Richmond, NSW
Is tap water safe?
Safety assessment
Water hardness
39.1 mg/L
Best water filter
Filter recommendations
New South Wales water quality
State coverage
Sydney Water
Water utility
Compare with Richmond Lowlands
Richmond vs Richmond Lowlands
Compare with Agnes Banks
Richmond vs Agnes Banks
Compare with North Richmond
Richmond vs North Richmond
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Sydney Water (2024-25 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.
