Tap Water Quality in Rosebery, NSW
Postcode 2018 · Supplied by Sydney Water via Woronora
Quality Score
About Rosebery
Rosebery is a suburb of 13,533 residents in New South Wales (postcode 2018). The median age is 33. It falls within the Sydney Water area. Neighbouring suburbs include Heathcote, Engadine, Goarra, Woronora Heights.
Most residents rent (51%), while 27% own their home with a mortgage, while 20% own outright. The median household income is $118,248 per year. The top countries of birth for residents are China (21%), United Kingdom (10%), and Greece (5%).
Tap water in Rosebery is supplied by Sydney Water. The suburb receives water via the Woronora supply zone.
Water quality summary
Based on 2024-25 water quality reports, Rosebery achieves a WaterScore of 9.5 out of 10, rated excellent overall. Water hardness measures 37.4 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.7, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 1.05 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.04 mg/L — well within the ADWG guideline of 5 mg/L. Total dissolved solids (TDS) measure 106.3 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.11 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Rosebery
Products matched to your water profile
ZeroWater
2.8L 5-Stage Jug (IAPMO Certified: PFOA/PFOS + Lead)
4.2 · 5,315 ratings on Amazon
Ideal for Rosebery — removes fluoride (currently 1.05 mg/L).
iSpring
RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)
4.6 · 13,756 ratings on Amazon
Ideal for Rosebery — removes fluoride (currently 1.05 mg/L).
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
A reliable 8.5l stainless steel gravity system suitable for Rosebery's water profile.
Comparison
How Rosebery compares
Compared to New South Wales and national averages
| Metric | Rosebery | NSW Avg | National Avg |
|---|---|---|---|
| Hardness | 37.4 mg/L | 45.9 mg/L | 85.3 mg/L |
| pH | 7.7 | 7.7 | 7.8 |
| Fluoride | 1.05 mg/L | 1 mg/L | 0.7 mg/L |
| Chlorine | 0.04 mg/L | — | — |
| Turbidity | 0.11 NTU | 0.2 NTU | 0.4 NTU |
| TDS | 106.3 mg/L | 116.3 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Iron | 0.005 | mg/L | < 0.3 | Good |
| Aluminium | 0.07 | mg/L | < 0.2 | Good |
| Manganese | 0.0008 | mg/L | < 0.1 | Good |
| Copper | 0.01 | mg/L | < 2 | Good |
| Zinc | 0.003 | mg/L | No limit | Measured |
| Ammonia | 0.285 | mg/L | No limit | Measured |
| Turbidity | 0.11 | NTU | < 5 | Good |
| Colour | 2 | HU | < 15 | Good |
| Dissolved Oxygen | 107 | % saturation | No limit | Measured |
| Total Dissolved Solids | 106.3 | mg/L | < 600 | Good |
| Sulfate | 3.1 | mg/L | < 500 | Good |
| Hardness | 37.4 | mg/L | < 200 | Good |
| pH | 7.7 | pH units | 6.5 – 8.5 | Normal |
| Temperature | 20.1 | degrees C | No limit | Measured |
| E. coli | 0 | orgs/100 mL | < 0 | Compliant |
| Free Chlorine | 0.04 | mg/L | < 5 | Good |
| Monochloramine | 1.97 | mg/L | < 3 | Good |
| Fluoride | 1.05 | mg/L | < 1.5 | Good |
| Trihalomethanes | 0.07 | mg/L | < 0.25 | Good |
| Ndma | 0.0001 | mg/L | No limit | Measured |
| Chloride | 0.004 | mg/L | < 250 | Good |
| PFOS + PFHxS | 0.0001 | µg/L | PFOS < 0.008, PFHxS < 0.03 | Good |
| PFOA | 0.0001 | µg/L | < 0.2 | Good |
Safety
Safety assessment
Based on 23 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (37.4 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.7 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 1.05 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 0.04 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Rosebery measures 0.04 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Rosebery's water is soft at 37.4 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 1.05 mg/L in Rosebery. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Rosebery's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Rosebery?
How hard is the water in Rosebery?
What water utility supplies Rosebery?
Does Rosebery water have fluoride?
What is the water quality score for Rosebery?
What is the population of Rosebery?
Supplier
Water utility
- Utility
- Sydney Water
- Supply Zone
- Woronora
- Data Source
- Sydney Water — quarterly woronora q2 202425, quarterly woronora q3 202425, quarterly woronora q4 202425
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.5 and 10.0
Utility reports average the grid — not your home
Rosebery's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Sydney
In-depth articles on the water supply that serves Rosebery
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Rosebery, NSW [Data set]. Compiled from Sydney Water data (2024-25 annual report). https://waterscore.com.au/water-quality/rosebery-nsw/
Embed
Add Rosebery, NSW water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Rosebery, NSW
Is tap water safe?
Safety assessment
Water hardness
37.4 mg/L
Best water filter
Filter recommendations
New South Wales water quality
State coverage
Sydney Water
Water utility
Compare with Heathcote
Rosebery vs Heathcote
Compare with Engadine
Rosebery vs Engadine
Compare with Goarra
Rosebery vs Goarra
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Sydney Water (2024-25 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.