As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Stepney, SA

Postcode 5069 · Supplied by SA Water via Western metro Adelaide suburbs

Current data · 2025 report

Quality Score

Share this page Twitter Facebook LinkedIn

About Stepney

Stepney is a suburb of 942 residents in South Australia (postcode 5069). The median age is 39. It falls within the SA Water area. Neighbouring suburbs include College Park, Maylands, Norwood South, Evandale.

Most residents rent (36%), while 32% own outright, while 28% own their home with a mortgage. The median household income is $98,228 per year. The top countries of birth for residents are United Kingdom (21%), India (13%), and Italy (13%).

Tap water in Stepney is supplied by SA Water. The suburb receives water via the Western metro Adelaide suburbs supply zone.

Water quality summary

Based on 2025 water quality reports, Stepney achieves a WaterScore of 9.0 out of 10, rated excellent overall. Water hardness measures 104 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The pH level is 0.05, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.44 mg/L, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.3 mg/L — well within the ADWG guideline of 5 mg/L. Total dissolved solids (TDS) measure 294 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: College Park , Maylands , Norwood South

Suburb snapshot

Population

942

Median Age

39 years

Median Income

$1,889 /week

Owner-occupied

60%

Recommended filters for Stepney

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Stepney's water

A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Stepney's water profile.

Waterdrop TSA 8-Layer Under-Sink Water Filter System

Waterdrop

TSA Under-Sink Filter (Fluoride + PFAS)

4.4 · 2,237 ratings on Amazon

Mid-range Matched to Stepney's water

A reliable tsa under-sink filter (fluoride + pfas) suitable for Stepney's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Stepney's water

A reliable 8.5l stainless steel gravity system suitable for Stepney's water profile.

How Stepney compares

Compared to South Australia and national averages

Metric Stepney SA Avg National Avg
Hardness 104 mg/L 119.3 mg/L 85.1 mg/L
pH 0.05 3.2 8.4
Fluoride 0.44 mg/L 0.5 mg/L 0.7 mg/L
Chlorine 0.3 mg/L
Turbidity 0.1 NTU 0.1 NTU 0.4 NTU
TDS 294 mg/L 341.5 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 63 mg/L No limit Measured
Aluminium 0.03 mg/L < 0.2 Good
Calcium 21.3 mg/L No limit Measured
Chloride 92 mg/L < 250 Good
Free Chlorine 0.3 mg/L < 5 Good
Total Chlorine 0.4 mg/L < 5 Good
Colour 1 HU < 15 Good
Copper 0.0127 mg/L < 2 Good
E. coli 0 cfu/100mL < 0 Compliant
Fluoride 0.44 mg/L < 1.5 Good
Hardness 104 PPM or mg/L < 200 Good
Iron 0.0119 mg/L < 0.3 Good
Lead 0.0004 mg/L < 0.01 Good
Magnesium 12.42 mg/L No limit Measured
Manganese 0.0012 mg/L < 0.1 Good
Nitrate 0.42 mg/L < 50 Good
pH 0.05 µg/L 6.5 – 8.5 Outside range
Sodium 57.3 mg/L < 180 Good
Sulfate 40.3 mg/L < 500 Good
Total Dissolved Solids 294 mg/L < 600 Good
Turbidity 0.1 NTU < 5 Good

Safety assessment

Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 0.05 µg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Moderately hard (104 mg/L)

Water Hardness

Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.

Outside Range

pH Level

pH of 0.05 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.44 mg/L. Below the recommended range.

Chlorine

Disinfection

Chlorine measured at 0.3 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in Stepney measures 0.3 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Soft Water Advantage

Stepney's water is moderately hard at 104 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 0.44 mg/L in Stepney. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Slightly Acidic Water

pH measures 0.05 in Stepney, which is slightly acidic. Running the tap for 30 seconds before drinking can flush any metals that dissolve more readily in acidic water.

Get water quality alerts

We'll email you when Stepney's water data is updated.

Frequently asked questions

Is tap water safe to drink in Stepney?
Yes, tap water in Stepney is generally safe to drink. It scores 9.0 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by SA Water. Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 0.05 µg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Stepney?
Water hardness in Stepney is 104 mg/L, classified as moderately hard. Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
What water utility supplies Stepney?
Stepney is supplied by SA Water.
Does Stepney water have fluoride?
Yes, water in Stepney is fluoridated, with a fluoride level of 0.44 mg/L. This is below the recommended range of 0.6–1.1 mg/L.
What is the water quality score for Stepney?
Stepney has a WaterScore of 9.0 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Stepney?
The population of Stepney, SA is 942 according to the 2021 Australian Census. The median age of residents is 39 years.

Water utility

Utility
SA Water
Supply Zone
Western metro Adelaide suburbs
Data Source
SA Water — water quality performance results november 2025

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 8.0 and 10.0

Utility reports average the grid — not your home

Stepney's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Adelaide and SA

In-depth articles on the water supply that serves Stepney

Explore more

Related pages for Stepney, SA

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

!

Utility data stops before your tap

Check lead, copper and bacteria

Test tap