As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Thurlga, SA

Postcode 5717 · Supplied by SA Water via Eyre South/Morgan

Current data · 2025 report

Quality Score

Share this page Twitter Facebook LinkedIn

About Thurlga

Thurlga is a suburb in South Australia, Australia (postcode 5717). It falls within the SA Water area. Neighbouring suburbs include Gawler Ranges, Yardea, Mount Ive, Kolendo.

Tap water in Thurlga is supplied by SA Water. The suburb receives water via the Eyre South/Morgan supply zone.

Water quality summary

Based on 2025 water quality reports, Thurlga achieves a WaterScore of 8.8 out of 10, rated excellent overall. Water hardness measures 194 mg/L, classified as hard. Residents may notice limescale buildup on appliances and fixtures. The pH level is 0.05, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.5 mg/L, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.1 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 461 mg/L, considered moderate against the ADWG guideline of 600 mg/L. Turbidity is 0.12 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Gawler Ranges , Yardea , Mount Ive

Recommended filters for Thurlga

Products matched to your water profile

Our top pick
iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

iSpring

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

Premium Matched to Thurlga's water

Ideal for Thurlga — reduces hardness from 194 mg/L, removes chlorine taste and odour.

YARNA Capacitive Electronic Water Descaler Whole House System

YARNA

Capacitive Electronic Water Descaler (Whole House)

4 · 538 ratings on Amazon

Mid-range Matched to Thurlga's water

Ideal for Thurlga — helps reduce limescale buildup from hard water (194 mg/L) without removing hardness minerals.

iSpring Counter-top Drinking Water Filter

iSpring

Counter-top Drinking Water Filter

4.4 · 1,108 ratings on Amazon

Budget-friendly Matched to Thurlga's water

Ideal for Thurlga — removes chlorine taste and odour.

How Thurlga compares

Compared to South Australia and national averages

Metric Thurlga SA Avg National Avg
Hardness 194 mg/L 119.3 mg/L 85.1 mg/L
pH 0.05 3.2 8.4
Fluoride 0.5 mg/L 0.5 mg/L 0.7 mg/L
Chlorine 1.1 mg/L
Turbidity 0.12 NTU 0.1 NTU 0.4 NTU
TDS 461 mg/L 341.5 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 158 mg/L No limit Measured
Aluminium 0.012 mg/L < 0.2 Good
Calcium 52.6 mg/L No limit Measured
Chloride 132 mg/L < 250 Good
Free Chlorine 1.1 mg/L < 5 Good
Total Chlorine 1.1 mg/L < 5 Good
Colour 1 HU < 15 Good
Copper 0.0076 mg/L < 2 Good
E. coli 0 cfu/100mL < 0 Compliant
Fluoride 0.5 mg/L < 1.5 Good
Hardness 194 PPM or mg/L < 200 Near limit
Iron 0.007 mg/L < 0.3 Good
Lead 0.0003 mg/L < 0.01 Good
Magnesium 15.1 mg/L No limit Measured
Manganese 0.0015 mg/L < 0.1 Good
Nitrate 10.35 mg/L < 50 Good
pH 0.05 µg/L 6.5 – 8.5 Outside range
Sodium 79.6 mg/L < 180 Good
Sulfate 33.6 mg/L < 500 Good
Total Dissolved Solids 461 mg/L < 600 Good
Turbidity 0.12 NTU < 5 Good

Safety assessment

Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 0.05 µg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Hard (194 mg/L)

Water Hardness

Your water is classified as hard. Expect noticeable limescale on heating elements, showerheads, and taps. Soap and shampoo may not lather as freely, requiring more product. Some residents report drier skin or hair. Periodic descaling of kettles and hot water systems is recommended to maintain efficiency.

Outside Range

pH Level

pH of 0.05 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.5 mg/L. Below the recommended range.

Chlorine

Disinfection

Chlorine measured at 1.1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Reduce Chlorine Taste

Thurlga's chlorine level is 1.1 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.

Watch for Limescale

Thurlga has hard water at 194 mg/L. Wipe taps and showerheads periodically with vinegar to prevent limescale buildup on fixtures.

Fluoride in Your Water

Fluoride measures 0.5 mg/L in Thurlga. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Consider a Filter for TDS

Total dissolved solids measure 461 mg/L. A reverse osmosis filter can reduce dissolved minerals if you prefer a cleaner taste in drinking water.

Slightly Acidic Water

pH measures 0.05 in Thurlga, which is slightly acidic. Running the tap for 30 seconds before drinking can flush any metals that dissolve more readily in acidic water.

Get water quality alerts

We'll email you when Thurlga's water data is updated.

Frequently asked questions

Is tap water safe to drink in Thurlga?
Yes, tap water in Thurlga is generally safe to drink. It scores 8.8 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by SA Water. Of 21 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 0.05 µg/L. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Thurlga?
Water hardness in Thurlga is 194 mg/L, classified as hard. Your water is classified as hard. Expect noticeable limescale on heating elements, showerheads, and taps. Soap and shampoo may not lather as freely, requiring more product. Some residents report drier skin or hair. Periodic descaling of kettles and hot water systems is recommended to maintain efficiency.
What water utility supplies Thurlga?
Thurlga is supplied by SA Water.
Does Thurlga water have fluoride?
Yes, water in Thurlga is fluoridated, with a fluoride level of 0.5 mg/L. This is below the recommended range of 0.6–1.1 mg/L.
What is the water quality score for Thurlga?
Thurlga has a WaterScore of 8.8 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.

Water utility

Utility
SA Water
Supply Zone
Eyre South/Morgan
Data Source
SA Water — water quality performance results november 2025

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 7.8 and 9.8

Utility reports average the grid — not your home

Thurlga's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Adelaide and SA

In-depth articles on the water supply that serves Thurlga

Explore more

Related pages for Thurlga, SA

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

Hard water · 194 mg/L — limescale risk

iSpring · ★ 4.6 on Amazon

Stop the scale →