Tap Water Quality in Wheeler Heights, NSW
Postcode 2097 · Supplied by Sydney Water via Ryde
Quality Score
About Wheeler Heights
Wheeler Heights is a suburb of 3,232 residents in New South Wales (postcode 2097). The median age is 40. It falls within the Sydney Water area. Neighbouring suburbs include Collaroy, Collaroy Beach, Collaroy Plateau West, Long Reef.
Most residents own their home with a mortgage (49%), while 35% own outright, while 15% rent. The median household income is $151,528 per year. The top countries of birth for residents are United Kingdom (37%), New Zealand (9%), and South Africa (4%).
Tap water in Wheeler Heights is supplied by Sydney Water. The suburb receives water via the Ryde supply zone.
Water quality summary
Based on 2024-25 water quality reports, Wheeler Heights achieves a WaterScore of 9.5 out of 10, rated excellent overall. Water hardness measures 49.3 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.8, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 1.01 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.04 mg/L — well within the ADWG guideline of 5 mg/L. Total dissolved solids (TDS) measure 137 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.13 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Collaroy , Collaroy Beach , Collaroy Plateau West
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Wheeler Heights
Products matched to your water profile
ZeroWater
2.8L 5-Stage Jug (IAPMO Certified: PFOA/PFOS + Lead)
4.2 · 5,315 ratings on Amazon
Ideal for Wheeler Heights — removes fluoride (currently 1.01 mg/L).
iSpring
RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)
4.6 · 13,756 ratings on Amazon
Ideal for Wheeler Heights — removes fluoride (currently 1.01 mg/L).
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
A reliable 8.5l stainless steel gravity system suitable for Wheeler Heights's water profile.
Comparison
How Wheeler Heights compares
Compared to New South Wales and national averages
| Metric | Wheeler Heights | NSW Avg | National Avg |
|---|---|---|---|
| Hardness | 49.3 mg/L | 45.9 mg/L | 85.1 mg/L |
| pH | 7.8 | 7.7 | 7.8 |
| Fluoride | 1.01 mg/L | 1 mg/L | 0.7 mg/L |
| Chlorine | 0.04 mg/L | — | — |
| Turbidity | 0.13 NTU | 0.2 NTU | 0.4 NTU |
| TDS | 137 mg/L | 116.3 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Iron | 0.006 | mg/L | < 0.3 | Good |
| Aluminium | 0.013 | mg/L | < 0.2 | Good |
| Manganese | 0.0014 | mg/L | < 0.1 | Good |
| Copper | 0.035 | mg/L | < 2 | Good |
| Zinc | 0.009 | mg/L | No limit | Measured |
| Ammonia | 0.177 | mg/L | No limit | Measured |
| Turbidity | 0.13 | NTU | < 5 | Good |
| Colour | 4 | HU | < 15 | Good |
| Dissolved Oxygen | 107.2 | % saturation | No limit | Measured |
| Total Dissolved Solids | 137 | mg/L | < 600 | Good |
| Sulfate | 8.8 | mg/L | < 500 | Good |
| Hardness | 49.3 | mg/L | < 200 | Good |
| pH | 7.8 | pH units | 6.5 – 8.5 | Normal |
| Temperature | 19.5 | degrees C | No limit | Measured |
| E. coli | 0 | orgs/100 mL | < 0 | Compliant |
| Free Chlorine | 0.04 | mg/L | < 5 | Good |
| Monochloramine | 1.74 | mg/L | < 3 | Good |
| Fluoride | 1.01 | mg/L | < 1.5 | Good |
| Trihalomethanes | 0.09 | mg/L | < 0.25 | Good |
| Ndma | 0.0001 | mg/L | No limit | Measured |
| Chloride | 0.004 | mg/L | < 250 | Good |
| PFOS + PFHxS | 0.0014 | µg/L | PFOS < 0.008, PFHxS < 0.03 | Good |
| PFOA | 0.0002 | µg/L | < 0.2 | Good |
Safety
Safety assessment
Based on 23 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (49.3 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.8 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 1.01 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 0.04 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Wheeler Heights measures 0.04 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Wheeler Heights's water is soft at 49.3 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 1.01 mg/L in Wheeler Heights. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Wheeler Heights's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Wheeler Heights?
How hard is the water in Wheeler Heights?
What water utility supplies Wheeler Heights?
Does Wheeler Heights water have fluoride?
What is the water quality score for Wheeler Heights?
What is the population of Wheeler Heights?
Supplier
Water utility
- Utility
- Sydney Water
- Supply Zone
- Ryde
- Data Source
- Sydney Water — quarterly ryde q2 202425, quarterly ryde q3 202425, quarterly ryde q4 202425
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.5 and 10.0
Utility reports average the grid — not your home
Wheeler Heights's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Sydney
In-depth articles on the water supply that serves Wheeler Heights
Related
Explore more
Related pages for Wheeler Heights, NSW
Is tap water safe?
Safety assessment
Water hardness
49.3 mg/L
Best water filter
Filter recommendations
New South Wales water quality
State coverage
Sydney Water
Water utility
Compare with Collaroy
Wheeler Heights vs Collaroy
Compare with Collaroy Beach
Wheeler Heights vs Collaroy Beach
Compare with Collaroy Plateau West
Wheeler Heights vs Collaroy Plateau West
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Sydney Water (2024-25 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.