Tap Water Quality in White Hills, TAS
Postcode 7258 · Supplied by TasWater via Longford
Quality Score
About White Hills
White Hills is a suburb of 172 residents in Tasmania (postcode 7258). The median age is 49. It falls within the TasWater area. Neighbouring suburbs include Breadalbane, Relbia, Glen Dhu, Kings Meadows.
Most residents own outright (52%), while 39% own their home with a mortgage, while 9% rent. The median household income is $69,316 per year. The top countries of birth for residents are United Kingdom (33%) and Singapore (25%).
Tap water in White Hills is supplied by TasWater. The suburb receives water via the Longford supply zone.
Water quality summary
Based on recent water quality reports, White Hills achieves a WaterScore of 9.6 out of 10, rated excellent overall. Water hardness measures 44.555556 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.359091, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.81 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.797453 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 121.777778 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.274727 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Breadalbane , Relbia , Glen Dhu
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for White Hills
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for White Hills — removes chlorine taste and odour.
Waterdrop
TSA Under-Sink Filter (Fluoride + PFAS)
4.4 · 2,237 ratings on Amazon
A reliable tsa under-sink filter (fluoride + pfas) suitable for White Hills's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for White Hills — removes chlorine taste and odour.
Comparison
How White Hills compares
Compared to Tasmania and national averages
| Metric | White Hills | TAS Avg | National Avg |
|---|---|---|---|
| Hardness | 44.555556 mg/L | 34.8 mg/L | 85.1 mg/L |
| pH | 7.359091 | 7.4 | 8.4 |
| Fluoride | 0.81 mg/L | 0.9 mg/L | 0.7 mg/L |
| Chlorine | 0.797453 mg/L | — | — |
| Turbidity | 0.274727 NTU | 0.3 NTU | 0.4 NTU |
| TDS | 121.777778 mg/L | 93.3 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 29.166667 | mg/L | No limit | Measured |
| Aluminium | 0.040833 | mg/L | < 0.2 | Good |
| Ammonia | 0.003556 | mg/L | No limit | Measured |
| Antimony | 0.001 | mg/L | No limit | Measured |
| Arsenic | 0.001 | mg/L | No limit | Measured |
| Cadmium | 0.0002 | mg/L | No limit | Measured |
| Calcium | 12.3 | mg/L | No limit | Measured |
| Chloride | 37 | mg/L | < 250 | Good |
| Free Chlorine | 0.797453 | mg/L | < 5 | Good |
| Total Chlorine | 0.982381 | mg/L | < 5 | Good |
| Chromium | 0.001 | mg/L | No limit | Measured |
| Colour | 2.555556 | Pt-Co | < 15 | Good |
| Conductivity | 211.833333 | uS/cm | No limit | Measured |
| Copper | 0.003083 | mg/L | < 2 | Good |
| Cyanide | 0.005 | mg/L | No limit | Measured |
| E. coli | 0 | MPN/100ml | < 0 | Compliant |
| Fluoride | 0.81 | mg/L | < 1.5 | Good |
| Hardness | 44.555556 | mg/L | < 200 | Good |
| Iron | 0.010833 | mg/L | < 0.3 | Good |
| Lead | 0.001 | mg/L | < 0.01 | Good |
| Magnesium | 5 | mg/L | No limit | Measured |
| Manganese | 0.00725 | mg/L | < 0.1 | Good |
| Mercury | 0.0001 | mg/L | No limit | Measured |
| Nickel | 0.001 | mg/L | No limit | Measured |
| Nitrate | 0.161353 | mg/L | < 50 | Good |
| Nitrite | 0.002444 | mg/L | No limit | Measured |
| pH | 7.359091 | pH units | 6.5 – 8.5 | Normal |
| Sodium | 23.143143 | mg/L | < 180 | Good |
| Sulfate | 26.888889 | mg/L | < 500 | Good |
| Temperature | 14.624242 | degrees C | No limit | Measured |
| Total Coliforms | 0 | MPN/100ml | < 0 | Compliant |
| Total Dissolved Solids | 121.777778 | mg/L | < 600 | Good |
| Trihalomethanes | 0.035167 | mg/L | < 0.25 | Good |
| Turbidity | 0.274727 | NTU | < 5 | Good |
| Zinc | 0.006667 | mg/L | No limit | Measured |
Safety
Safety assessment
Based on 35 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (44.555556 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.359091 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.81 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 0.797453 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in White Hills measures 0.797453 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
White Hills's water is soft at 44.555556 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.81 mg/L in White Hills. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when White Hills's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in White Hills?
How hard is the water in White Hills?
What water utility supplies White Hills?
Does White Hills water have fluoride?
What is the water quality score for White Hills?
What is the population of White Hills?
Supplier
Water utility
- Utility
- TasWater
- Supply Zone
- Longford
- Data Source
- TasWater — Longford
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.6 and 10.0
Utility reports average the grid — not your home
White Hills's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Launceston and northern Tasmania
In-depth articles on the water supply that serves White Hills
Related
Explore more
Related pages for White Hills, TAS
Is tap water safe?
Safety assessment
Water hardness
44.555556 mg/L
Best water filter
Filter recommendations
Tasmania water quality
State coverage
TasWater
Water utility
Compare with Breadalbane
White Hills vs Breadalbane
Compare with Relbia
White Hills vs Relbia
Compare with Glen Dhu
White Hills vs Glen Dhu
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from TasWater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.