Tap Water Quality in Whyte Yarcowie, SA
Postcode 5420 · Supplied by SA Water via Terowie
Quality Score
About Whyte Yarcowie
Whyte Yarcowie is a suburb of 50 residents in South Australia (postcode 5420). The median age is 40. It falls within the SA Water area. Neighbouring suburbs include Canowie Belt, Terowie, Franklyn, Canowie.
Most residents own their home with a mortgage (47%), while 29% own outright, while 24% rent. The median household income is $71,448 per year. The top countries of birth for residents are United Kingdom (100%).
Tap water in Whyte Yarcowie is supplied by SA Water. The suburb receives water via the Terowie supply zone.
Water quality summary
Based on 2025 water quality reports, Whyte Yarcowie achieves a WaterScore of 9.5 out of 10, rated excellent overall. Water hardness measures 86 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The water is fluoridated at 0.6 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.3 mg/L — well within the ADWG guideline of 5 mg/L. Total dissolved solids (TDS) measure 291 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Canowie Belt , Terowie , Franklyn
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Whyte Yarcowie
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra Pro)
4.8 · 125 ratings on Amazon
A reliable marella 2.4l fridge water filter jug (maxtra pro) suitable for Whyte Yarcowie's water profile.
ZeroWater
23-Cup Dispenser (incl. TDS Meter)
4.3 · 27,123 ratings on Amazon
A reliable 23-cup dispenser (incl. tds meter) suitable for Whyte Yarcowie's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
A reliable 8.5l stainless steel gravity system suitable for Whyte Yarcowie's water profile.
Comparison
How Whyte Yarcowie compares
Compared to South Australia and national averages
| Metric | Whyte Yarcowie | SA Avg | National Avg |
|---|---|---|---|
| Hardness | 86 mg/L | 119.3 mg/L | 80.3 mg/L |
| pH | — | 8.6 | 7.8 |
| Fluoride | 0.6 mg/L | 0.5 mg/L | 0.7 mg/L |
| Chlorine | 0.3 mg/L | — | — |
| Turbidity | 0.1 NTU | 0.1 NTU | 0.4 NTU |
| TDS | 291 mg/L | 341.5 mg/L | 267.4 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 61 | mg/L | No limit | Measured |
| Aluminium | 0.042 | mg/L | < 0.2 | Good |
| Calcium | 17.1 | mg/L | No limit | Measured |
| Chloride | 81 | mg/L | < 250 | Good |
| Free Chlorine | 0.3 | mg/L | < 5 | Good |
| Total Chlorine | 0.3 | mg/L | < 5 | Good |
| Colour | 1 | HU | < 15 | Good |
| Copper | 0.0519 | mg/L | < 2 | Good |
| E. coli | 0 | cfu/100mL | < 0 | Compliant |
| Fluoride | 0.6 | mg/L | < 1.5 | Good |
| Hardness | 86 | PPM or mg/L | < 200 | Good |
| Iron | 0.006 | mg/L | < 0.3 | Good |
| Lead | 0.0001 | mg/L | < 0.01 | Good |
| Magnesium | 10.58 | mg/L | No limit | Measured |
| Manganese | 0.0016 | mg/L | < 0.1 | Good |
| Nitrate | 0.6 | mg/L | < 50 | Good |
| Sodium | 68 | mg/L | < 180 | Good |
| Sulfate | 53 | mg/L | < 500 | Good |
| Total Dissolved Solids | 291 | mg/L | < 600 | Good |
| Turbidity | 0.1 | NTU | < 5 | Good |
Safety
Safety assessment
Based on 20 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Moderately hard (86 mg/L)
Water Hardness
Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
Data unavailable
pH Level
pH data is not currently available for Whyte Yarcowie.
Fluoridated
Fluoride
Fluoride at 0.6 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 0.3 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Whyte Yarcowie measures 0.3 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Whyte Yarcowie's water is moderately hard at 86 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.6 mg/L in Whyte Yarcowie. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Whyte Yarcowie's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Whyte Yarcowie?
How hard is the water in Whyte Yarcowie?
What water utility supplies Whyte Yarcowie?
Does Whyte Yarcowie water have fluoride?
What is the water quality score for Whyte Yarcowie?
What is the population of Whyte Yarcowie?
Supplier
Water utility
- Utility
- SA Water
- Supply Zone
- Terowie
- Data Source
- SA Water — water quality performance results november 2025
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.5 and 10.0
Utility reports average the grid — not your home
Whyte Yarcowie's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Adelaide and SA
In-depth articles on the water supply that serves Whyte Yarcowie
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Whyte Yarcowie, SA [Data set]. Compiled from SA Water data (2025 report). https://waterscore.com.au/water-quality/whyte-yarcowie-sa/
Embed
Add Whyte Yarcowie, SA water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Whyte Yarcowie, SA
Is tap water safe?
Safety assessment
Water hardness
86 mg/L
Best water filter
Filter recommendations
South Australia water quality
State coverage
SA Water
Water utility
Compare with Terowie
Whyte Yarcowie vs Terowie
Compare with Canowie
Whyte Yarcowie vs Canowie
Compare with Hallett
Whyte Yarcowie vs Hallett
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.