As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Willunga, SA

Postcode 5172 · Supplied by SA Water via Myponga metro (supplying outer southern Adelaide)

Current data · 2025 report

Quality Score

Share this page Twitter Facebook LinkedIn

About Willunga

Willunga is a suburb of 2,445 residents in South Australia (postcode 5172). The median age is 47. It falls within the SA Water area. Neighbouring suburbs include Dingabledinga, Hope Forest, Kuitpo, Kuitpo Colony.

Most residents own outright (43%), while 40% own their home with a mortgage, while 15% rent. The median household income is $87,412 per year. The top countries of birth for residents are United Kingdom (69%), New Zealand (6%), and South Africa (3%).

Tap water in Willunga is supplied by SA Water. The suburb receives water via the Myponga metro (supplying outer southern Adelaide) supply zone.

Water quality summary

Based on 2025 water quality reports, Willunga achieves a WaterScore of 8.6 out of 10, rated excellent overall. Water hardness measures 136 mg/L, classified as hard. Residents may notice limescale buildup on appliances and fixtures. The pH level is 8.6, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.7 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.1 mg/L — well within the ADWG guideline of 5 mg/L. Total dissolved solids (TDS) measure 468 mg/L, considered moderate against the ADWG guideline of 600 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU.

Compare with nearby suburbs: Dingabledinga , Hope Forest , Kuitpo

Suburb snapshot

Population

2,445

Median Age

47 years

Median Income

$1,681 /week

Owner-occupied

83%

Recommended filters for Willunga

Products matched to your water profile

Our top pick
iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

iSpring

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

Premium Matched to Willunga's water

Ideal for Willunga — reduces hardness from 136 mg/L.

YARNA Capacitive Electronic Water Descaler Whole House System

YARNA

Capacitive Electronic Water Descaler (Whole House)

4 · 538 ratings on Amazon

Mid-range Matched to Willunga's water

Ideal for Willunga — helps reduce limescale buildup from hard water (136 mg/L) without removing hardness minerals.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Willunga's water

A reliable 8.5l stainless steel gravity system suitable for Willunga's water profile.

How Willunga compares

Compared to South Australia and national averages

Metric Willunga SA Avg National Avg
Hardness 136 mg/L 119.3 mg/L 85.1 mg/L
pH 8.6 3.2 8.4
Fluoride 0.7 mg/L 0.5 mg/L 0.7 mg/L
Chlorine 0.1 mg/L
Turbidity 0.1 NTU 0.1 NTU 0.4 NTU
TDS 468 mg/L 341.5 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 76 mg/L No limit Measured
Aluminium 0.051 mg/L < 0.2 Good
Calcium 28.7 mg/L No limit Measured
Chloride 156 mg/L < 250 Good
Free Chlorine 0.1 mg/L < 5 Good
Total Chlorine 2.8 mg/L < 5 Good
Colour 2 HU < 15 Good
Copper 0.0111 mg/L < 2 Good
Fluoride 0.7 mg/L < 1.5 Good
Hardness 136 PPM or mg/L < 200 Good
Iron 0.0026 mg/L < 0.3 Good
Lead 0.0002 mg/L < 0.01 Good
Magnesium 15.5 mg/L No limit Measured
Manganese 0.0014 mg/L < 0.1 Good
Nitrate 0.93 mg/L < 50 Good
pH 8.6 pH units 6.5 – 8.5 Outside range
Sodium 106.4 mg/L < 180 Good
Sulfate 70.1 mg/L < 500 Good
Total Dissolved Solids 468 mg/L < 600 Good
Turbidity 0.1 NTU < 5 Good

Safety assessment

Of 20 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 8.6 pH units.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Hard (136 mg/L)

Water Hardness

Your water is classified as hard. Expect noticeable limescale on heating elements, showerheads, and taps. Soap and shampoo may not lather as freely, requiring more product. Some residents report drier skin or hair. Periodic descaling of kettles and hot water systems is recommended to maintain efficiency.

Outside Range

pH Level

pH of 8.6 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.7 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 0.1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in Willunga measures 0.1 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Watch for Limescale

Willunga has hard water at 136 mg/L. Wipe taps and showerheads periodically with vinegar to prevent limescale buildup on fixtures.

Fluoride in Your Water

Fluoride measures 0.7 mg/L in Willunga. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Consider a Filter for TDS

Total dissolved solids measure 468 mg/L. A reverse osmosis filter can reduce dissolved minerals if you prefer a cleaner taste in drinking water.

Alkaline Water

pH measures 8.6 in Willunga, which is above the ADWG guideline range. This may cause a slightly bitter taste but is generally not a practical concern.

Get water quality alerts

We'll email you when Willunga's water data is updated.

Frequently asked questions

Is tap water safe to drink in Willunga?
Yes, tap water in Willunga is generally safe to drink. It scores 8.6 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by SA Water. Of 20 parameters tested, most fall within Australian Drinking Water Guidelines with 1 exception: pH at 8.6 pH units.
How hard is the water in Willunga?
Water hardness in Willunga is 136 mg/L, classified as hard. Your water is classified as hard. Expect noticeable limescale on heating elements, showerheads, and taps. Soap and shampoo may not lather as freely, requiring more product. Some residents report drier skin or hair. Periodic descaling of kettles and hot water systems is recommended to maintain efficiency.
What water utility supplies Willunga?
Willunga is supplied by SA Water.
Does Willunga water have fluoride?
Yes, water in Willunga is fluoridated, with a fluoride level of 0.7 mg/L. This is within the recommended range for dental health.
What is the water quality score for Willunga?
Willunga has a WaterScore of 8.6 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Willunga?
The population of Willunga, SA is 2,445 according to the 2021 Australian Census. The median age of residents is 47 years.

Water utility

Utility
SA Water
Supply Zone
Myponga metro (supplying outer southern Adelaide)
Data Source
SA Water — water quality performance results november 2025

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 7.6 and 9.6

Utility reports average the grid — not your home

Willunga's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Adelaide and SA

In-depth articles on the water supply that serves Willunga

Explore more

Related pages for Willunga, SA

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

Hard water · 136 mg/L — limescale risk

iSpring · ★ 4.6 on Amazon

Stop the scale →