Tap Water Quality in Yellabinna, SA
Postcode 5690 · Supplied by SA Water via Eyre South/Morgan
Quality Score
About Yellabinna
Yellabinna is a suburb in South Australia, Australia (postcode 5690). It falls within the SA Water area. Neighbouring suburbs include Yumbarra, Chundaria, Nanbona, Mitchidy Moola.
Most residents own their home with a mortgage (0%), while 0% own outright, while 0% rent. The median household income is $0 per year.
Tap water in Yellabinna is supplied by SA Water. The suburb receives water via the Eyre South/Morgan supply zone.
Water quality summary
Based on 2025 water quality reports, Yellabinna achieves a WaterScore of 9.3 out of 10, rated excellent overall. Water hardness measures 194 mg/L, classified as hard. Residents may notice limescale buildup on appliances and fixtures. The water is fluoridated at 0.5 mg/L, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.1 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 461 mg/L, considered moderate against the ADWG guideline of 600 mg/L. Turbidity is 0.12 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Census Data
Suburb snapshot
Population
Median Age
Median Income
194/200 mg/L
63% above South Australia avg
142% above national avg
Recommended filters for Yellabinna
Products matched to your water profile
iSpring
RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)
4.6 · 13,756 ratings on Amazon
Ideal for Yellabinna — reduces hardness from 194 mg/L, removes chlorine taste and odour.
YARNA
Capacitive Electronic Water Descaler (Whole House)
4 · 538 ratings on Amazon
Ideal for Yellabinna — helps reduce limescale buildup from hard water (194 mg/L) without removing hardness minerals.
Nakii
Water Filter Pitcher (150 Gallons)
4.4 · 6,827 ratings on Amazon
Ideal for Yellabinna — removes chlorine taste and odour.
Comparison
How Yellabinna compares
Compared to South Australia and national averages
| Metric | Yellabinna | SA Avg | National Avg |
|---|---|---|---|
| Hardness | 194 mg/L | 119.3 mg/L | 80.3 mg/L |
| pH | — | 8.6 | 7.8 |
| Fluoride | 0.5 mg/L | 0.5 mg/L | 0.7 mg/L |
| Chlorine | 1.1 mg/L | — | — |
| Turbidity | 0.12 NTU | 0.1 NTU | 0.4 NTU |
| TDS | 461 mg/L | 341.5 mg/L | 267.4 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 158 | mg/L | No limit | Measured |
| Aluminium | 0.012 | mg/L | < 0.2 | Good |
| Calcium | 52.6 | mg/L | No limit | Measured |
| Chloride | 132 | mg/L | < 250 | Good |
| Free Chlorine | 1.1 | mg/L | < 5 | Good |
| Total Chlorine | 1.1 | mg/L | < 5 | Good |
| Colour | 1 | HU | < 15 | Good |
| Copper | 0.0076 | mg/L | < 2 | Good |
| E. coli | 0 | cfu/100mL | < 0 | Compliant |
| Fluoride | 0.5 | mg/L | < 1.5 | Good |
| Hardness | 194 | PPM or mg/L | < 200 | Near limit |
| Iron | 0.007 | mg/L | < 0.3 | Good |
| Lead | 0.0003 | mg/L | < 0.01 | Good |
| Magnesium | 15.1 | mg/L | No limit | Measured |
| Manganese | 0.0015 | mg/L | < 0.1 | Good |
| Nitrate | 10.35 | mg/L | < 50 | Good |
| Sodium | 79.6 | mg/L | < 180 | Good |
| Sulfate | 33.6 | mg/L | < 500 | Good |
| Total Dissolved Solids | 461 | mg/L | < 600 | Good |
| Turbidity | 0.12 | NTU | < 5 | Good |
Safety
Safety assessment
Based on 20 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Hard (194 mg/L)
Water Hardness
Your water is classified as hard. Expect noticeable limescale on heating elements, showerheads, and taps. Soap and shampoo may not lather as freely, requiring more product. Some residents report drier skin or hair. Periodic descaling of kettles and hot water systems is recommended to maintain efficiency.
Data unavailable
pH Level
pH data is not currently available for Yellabinna.
Fluoridated
Fluoride
Fluoride at 0.5 mg/L. Below the recommended range.
Chlorine
Disinfection
Chlorine measured at 1.1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Reduce Chlorine Taste
Yellabinna's chlorine level is 1.1 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.
Watch for Limescale
Yellabinna has hard water at 194 mg/L. Wipe taps and showerheads periodically with vinegar to prevent limescale buildup on fixtures.
Fluoride in Your Water
Fluoride measures 0.5 mg/L in Yellabinna. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Consider a Filter for TDS
Total dissolved solids measure 461 mg/L. A reverse osmosis filter can reduce dissolved minerals if you prefer a cleaner taste in drinking water.
Get water quality alerts
We'll email you when Yellabinna's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Yellabinna?
How hard is the water in Yellabinna?
What water utility supplies Yellabinna?
Does Yellabinna water have fluoride?
What is the water quality score for Yellabinna?
What is the population of Yellabinna?
Supplier
Water utility
- Utility
- SA Water
- Supply Zone
- Eyre South/Morgan
- Data Source
- SA Water — water quality performance results november 2025
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.3 and 10.0
Utility reports average the grid — not your home
Yellabinna's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Adelaide and SA
In-depth articles on the water supply that serves Yellabinna
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Yellabinna, SA [Data set]. Compiled from SA Water data (2025 report). https://waterscore.com.au/water-quality/yellabinna-sa/
Embed
Add Yellabinna, SA water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Yellabinna, SA
Is tap water safe?
Safety assessment
Water hardness
194 mg/L
Best water filter
Filter recommendations
South Australia water quality
State coverage
SA Water
Water utility
Compare with Mulgathing
Yellabinna vs Mulgathing
Compare with Ceduna
Yellabinna vs Ceduna
Compare with Commonwealth Hill
Yellabinna vs Commonwealth Hill
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.