Tap Water Quality in Allandale Station, SA
Postcode 5723 · Supplied by SA Water via Oodnadatta
Quality Score
About Allandale Station
Allandale Station is a suburb in South Australia, Australia (postcode 5723). It falls within the SA Water area. Neighbouring suburbs include Oodnadatta, Nilpinna Station, Arckaringa, Mount Sarah.
Tap water in Allandale Station is supplied by SA Water. The suburb receives water via the Oodnadatta supply zone.
Water quality summary
Based on 2025 water quality reports, Allandale Station achieves a WaterScore of 9.6 out of 10, rated excellent overall. Water hardness measures 56 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. Fluoride levels are very low at 0.1 mg/L, indicating the water is not significantly fluoridated. Chlorine, used for disinfection, measures 1.2 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 246 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Oodnadatta , Nilpinna Station , Arckaringa
Recommended filters for Allandale Station
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra Pro)
4.8 · 125 ratings on Amazon
Ideal for Allandale Station — removes chlorine taste and odour.
ZeroWater
23-Cup Dispenser (incl. TDS Meter)
4.3 · 27,123 ratings on Amazon
A reliable 23-cup dispenser (incl. tds meter) suitable for Allandale Station's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for Allandale Station — removes chlorine taste and odour.
Comparison
How Allandale Station compares
Compared to South Australia and national averages
| Metric | Allandale Station | SA Avg | National Avg |
|---|---|---|---|
| Hardness | 56 mg/L | 119.3 mg/L | 80.3 mg/L |
| pH | — | 8.6 | 7.8 |
| Fluoride | 0.1 mg/L | 0.5 mg/L | 0.7 mg/L |
| Chlorine | 1.2 mg/L | — | — |
| Turbidity | 0.1 NTU | 0.1 NTU | 0.4 NTU |
| TDS | 246 mg/L | 341.5 mg/L | 267.4 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 56 | mg/L | No limit | Measured |
| Aluminium | 0.001 | mg/L | < 0.2 | Good |
| Calcium | 17.8 | mg/L | No limit | Measured |
| Chloride | 73 | mg/L | < 250 | Good |
| Free Chlorine | 1.2 | mg/L | < 5 | Good |
| Total Chlorine | 1.2 | mg/L | < 5 | Good |
| Colour | 1 | HU | < 15 | Good |
| Copper | 0.0024 | mg/L | < 2 | Good |
| E. coli | 0 | MPN/100mL | < 0 | Compliant |
| Fluoride | 0.1 | mg/L | < 1.5 | Good |
| Hardness | 56 | PPM or mg/L | < 200 | Good |
| Iron | 0.0316 | mg/L | < 0.3 | Good |
| Lead | 0.0001 | mg/L | < 0.01 | Good |
| Magnesium | 2.73 | mg/L | No limit | Measured |
| Manganese | 0.0017 | mg/L | < 0.1 | Good |
| Nitrate | 0.22 | mg/L | < 50 | Good |
| Sodium | 57.7 | mg/L | < 180 | Good |
| Sulfate | 27.7 | mg/L | < 500 | Good |
| Total Dissolved Solids | 246 | mg/L | < 600 | Good |
| Turbidity | 0.1 | NTU | < 5 | Good |
Safety
Safety assessment
Based on 20 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (56 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Data unavailable
pH Level
pH data is not currently available for Allandale Station.
Low fluoride
Fluoride
Fluoride at 0.1 mg/L. Below the recommended range.
Chlorine
Disinfection
Chlorine measured at 1.2 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Reduce Chlorine Taste
Allandale Station's chlorine level is 1.2 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.
Soft Water Advantage
Allandale Station's water is soft at 56 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.1 mg/L in Allandale Station. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Allandale Station's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Allandale Station?
How hard is the water in Allandale Station?
What water utility supplies Allandale Station?
Does Allandale Station water have fluoride?
What is the water quality score for Allandale Station?
Supplier
Water utility
- Utility
- SA Water
- Supply Zone
- Oodnadatta
- Data Source
- SA Water — water quality performance results november 2025
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.6 and 10.0
Utility reports average the grid — not your home
Allandale Station's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Adelaide and SA
In-depth articles on the water supply that serves Allandale Station
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Allandale Station, SA [Data set]. Compiled from SA Water data (2025 report). https://waterscore.com.au/water-quality/allandale-station-sa/
Embed
Add Allandale Station, SA water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Allandale Station, SA
Is tap water safe?
Safety assessment
Water hardness
56 mg/L
Best water filter
Filter recommendations
South Australia water quality
State coverage
SA Water
Water utility
Compare with Oodnadatta
Allandale Station vs Oodnadatta
Compare with Arckaringa
Allandale Station vs Arckaringa
Compare with Coober Pedy
Allandale Station vs Coober Pedy
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.