As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Blaxland East, NSW

Postcode 2774 · Supplied by Sydney Water via Cascade

Current data · 2024-25 annual report

Quality Score

Share this page Twitter Facebook LinkedIn

About Blaxland East

Blaxland East is a suburb in New South Wales, Australia (postcode 2774). It falls within the Sydney Water area. Neighbouring suburbs include Mount Riverview, Blaxland, Warrimoo, Glenbrook.

Tap water in Blaxland East is supplied by Sydney Water. The suburb receives water via the Cascade supply zone.

Water quality summary

Based on 2024-25 water quality reports, Blaxland East achieves a WaterScore of 9.7 out of 10, rated excellent overall. Water hardness measures 38.1 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.7, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 1.04 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.06 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 92.5 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.17 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Mount Riverview , Blaxland , Warrimoo

Recommended filters for Blaxland East

Products matched to your water profile

Our top pick
ZeroWater 2.8L 5-Stage Water Filter Jug with TDS Meter

ZeroWater

2.8L 5-Stage Jug (PFAS + Fluoride + Lead, IAPMO Certified)

4.2 · 5,315 ratings on Amazon

Budget-friendly Matched to Blaxland East's water

Ideal for Blaxland East — removes fluoride (currently 1.04 mg/L).

iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

iSpring

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

Premium Matched to Blaxland East's water

Ideal for Blaxland East — removes fluoride (currently 1.04 mg/L), removes chlorine taste and odour.

Nakii Water Filter Pitcher with WQA certification

Nakii

Water Filter Pitcher (WQA Certified, 150 Gallons)

4.4 · 6,827 ratings on Amazon

Budget-friendly Matched to Blaxland East's water

Ideal for Blaxland East — removes chlorine taste and odour.

How Blaxland East compares

Compared to New South Wales and national averages

Metric Blaxland East NSW Avg National Avg
Hardness 38.1 mg/L 45.9 mg/L 85.1 mg/L
pH 7.7 7.7 8.4
Fluoride 1.04 mg/L 1 mg/L 0.7 mg/L
Chlorine 1.06 mg/L — —
Turbidity 0.17 NTU 0.2 NTU 0.4 NTU
TDS 92.5 mg/L 116.3 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Iron 0.016 mg/L < 0.3 Good
Aluminium 0.017 mg/L < 0.2 Good
Manganese 0.0031 mg/L < 0.1 Good
Copper 0.014 mg/L < 2 Good
Zinc 0.005 mg/L No limit Measured
Ammonia 0.001 mg/L No limit Measured
Turbidity 0.17 NTU < 5 Good
Colour 2 HU < 15 Good
Dissolved Oxygen 87.9 % saturation No limit Measured
Total Dissolved Solids 92.5 mg/L < 600 Good
Sulfate 0.9 mg/L < 500 Good
Hardness 38.1 mg/L < 200 Good
pH 7.7 pH units 6.5 – 8.5 Normal
Temperature 16.1 degrees C No limit Measured
E. coli 0 orgs/100 mL < 0 Compliant
Free Chlorine 1.06 mg/L < 5 Good
Monochloramine 0.07 mg/L < 3 Good
Fluoride 1.04 mg/L < 1.5 Good
Trihalomethanes 0.03 mg/L < 0.25 Good
Ndma 0.0001 mg/L No limit Measured
Chloride 0.004 mg/L < 250 Good
Pfos Pfhxs 0.0026 µg/L No limit Measured
PFOA 0.0001 µg/L < 0.56 Good

Safety assessment

Based on 23 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Soft (38.1 mg/L)

Water Hardness

Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.

Normal Range

pH Level

pH of 7.7 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 1.04 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 1.06 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Reduce Chlorine Taste

Blaxland East's chlorine level is 1.06 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.

Soft Water Advantage

Blaxland East's water is soft at 38.1 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 1.04 mg/L in Blaxland East. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Get water quality alerts

We'll email you when Blaxland East's water data is updated.

Frequently asked questions

Is tap water safe to drink in Blaxland East?
Yes, tap water in Blaxland East is generally safe to drink. It scores 9.7 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by Sydney Water. Based on 23 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Blaxland East?
Water hardness in Blaxland East is 38.1 mg/L, classified as soft. Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
What water utility supplies Blaxland East?
Blaxland East is supplied by Sydney Water.
Does Blaxland East water have fluoride?
Yes, water in Blaxland East is fluoridated, with a fluoride level of 1.04 mg/L. This is within the recommended range for dental health.
What is the water quality score for Blaxland East?
Blaxland East has a WaterScore of 9.7 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.

Water utility

Utility
Sydney Water
Supply Zone
Cascade
Data Source
Sydney Water — quarterly cascade q2 202425, quarterly cascade q3 202425, quarterly cascade q4 202425

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 8.7 and 10.0

Utility reports average the grid — not your home

Blaxland East's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Sydney

In-depth articles on the water supply that serves Blaxland East

Explore more

Related pages for Blaxland East, NSW

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Sydney Water (2024-25 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

Fluoride · 1.04 mg/L — carbon won't help

iSpring · ★ 4.6 on Amazon

Remove fluoride →