Tap Water Quality in Bridport, TAS
Postcode 7262 · Supplied by TasWater via Bridport
Quality Score
About Bridport
Bridport is a suburb of 1,742 residents in Tasmania (postcode 7262). The median age is 51. It falls within the TasWater area. Neighbouring suburbs include Blumont, Cuckoo, Forester, Jetsonville.
Most residents own outright (44%), while 31% own their home with a mortgage, while 21% rent. The median household income is $64,584 per year. The top countries of birth for residents are United Kingdom (36%), New Zealand (12%), and Netherlands (8%).
Tap water in Bridport is supplied by TasWater. The suburb receives water via the Bridport, Scottsdale supply zones.
Water quality summary
Based on recent water quality reports, Bridport achieves a WaterScore of 9.5 out of 10, rated excellent overall. Water hardness measures 24.785714 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.355859, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.856667 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.192727 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 252.857143 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.308586 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Bridport
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for Bridport — removes chlorine taste and odour.
ZeroWater
23-Cup Dispenser (incl. TDS Meter)
4.3 · 27,123 ratings on Amazon
A reliable 23-cup dispenser (incl. tds meter) suitable for Bridport's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for Bridport — removes chlorine taste and odour.
Comparison
How Bridport compares
Compared to Tasmania and national averages
| Metric | Bridport | TAS Avg | National Avg |
|---|---|---|---|
| Hardness | 24.785714 mg/L | 34.8 mg/L | 85.1 mg/L |
| pH | 7.355859 | 7.4 | 8.4 |
| Fluoride | 0.856667 mg/L | 0.9 mg/L | 0.7 mg/L |
| Chlorine | 1.192727 mg/L | — | — |
| Turbidity | 0.308586 NTU | 0.3 NTU | 0.4 NTU |
| TDS | 252.857143 mg/L | 93.3 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 51.142857 | mg/L | No limit | Measured |
| Aluminium | 0.01375 | mg/L | < 0.2 | Good |
| Ammonia | 0.002 | mg/L | No limit | Measured |
| Antimony | 0.001 | mg/L | No limit | Measured |
| Arsenic | 0.001 | mg/L | No limit | Measured |
| Cadmium | 0.0002 | mg/L | No limit | Measured |
| Calcium | 3.725 | mg/L | No limit | Measured |
| Chloride | 37.5 | mg/L | < 250 | Good |
| Free Chlorine | 1.192727 | mg/L | < 5 | Good |
| Total Chlorine | 1.505 | mg/L | < 5 | Good |
| Chromium | 0.001 | mg/L | No limit | Measured |
| Colour | 2.357143 | Pt-Co | < 15 | Good |
| Conductivity | 406.428571 | uS/cm | No limit | Measured |
| Copper | 0.00675 | mg/L | < 2 | Good |
| Cyanide | 0.005 | mg/L | No limit | Measured |
| E. coli | 0 | MPN/100ml | < 0 | Compliant |
| Fluoride | 0.856667 | mg/L | < 1.5 | Good |
| Hardness | 24.785714 | mg/L | < 200 | Good |
| Iron | 0.01 | mg/L | < 0.3 | Good |
| Lead | 0.001 | mg/L | < 0.01 | Good |
| Magnesium | 3.6 | mg/L | No limit | Measured |
| Manganese | 0.00525 | mg/L | < 0.1 | Good |
| Mercury | 0.0001 | mg/L | No limit | Measured |
| Nickel | 0.001 | mg/L | No limit | Measured |
| Nitrate | 0.6 | mg/L | < 50 | Good |
| Nitrite | 0.002 | mg/L | No limit | Measured |
| pH | 7.355859 | pH units | 6.5 – 8.5 | Normal |
| Sodium | 54.4 | mg/L | < 180 | Good |
| Sulfate | 89.214286 | mg/L | < 500 | Good |
| Temperature | 14.766667 | degrees C | No limit | Measured |
| Total Coliforms | 0 | MPN/100ml | < 0 | Compliant |
| Total Dissolved Solids | 252.857143 | mg/L | < 600 | Good |
| Trihalomethanes | 0.05125 | mg/L | < 0.25 | Good |
| Turbidity | 0.308586 | NTU | < 5 | Good |
| Zinc | 0.008125 | mg/L | No limit | Measured |
Safety
Safety assessment
Based on 35 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (24.785714 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.355859 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.856667 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 1.192727 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Reduce Chlorine Taste
Bridport's chlorine level is 1.192727 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.
Soft Water Advantage
Bridport's water is soft at 24.785714 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.856667 mg/L in Bridport. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Bridport's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Bridport?
How hard is the water in Bridport?
What water utility supplies Bridport?
Does Bridport water have fluoride?
What is the water quality score for Bridport?
What is the population of Bridport?
Supplier
Water utility
- Utility
- TasWater
- Supply Zone
- Bridport
- Data Source
- TasWater — Bridport, Scottsdale
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.5 and 10.0
Utility reports average the grid — not your home
Bridport's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Launceston and northern Tasmania
In-depth articles on the water supply that serves Bridport
Related
Explore more
Related pages for Bridport, TAS
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from TasWater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.