As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in German Creek, SA

Postcode 5280 · Supplied by SA Water via Beachport

Current data · 2025 report

Quality Score

Share this page Twitter Facebook LinkedIn

About German Creek

German Creek is a suburb of 25 residents in South Australia (postcode 5280). The median age is 31. It falls within the SA Water area. Neighbouring suburbs include Clay Wells, Furner, Hatherleigh, Kangaroo Inn.

Most residents own their home with a mortgage (63%), while 63% own outright, while 63% rent. The median household income is $100,724 per year.

Tap water in German Creek is supplied by SA Water. The suburb receives water via the Beachport supply zone.

Water quality summary

Based on 2025 water quality reports, German Creek achieves a WaterScore of 8.8 out of 10, rated excellent overall. Water hardness measures 257 mg/L, classified as very hard. Residents may notice limescale buildup on appliances and fixtures. The pH level is 0.05, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.2 mg/L, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 674 mg/L, considered elevated against the ADWG guideline of 600 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Clay Wells , Furner , Hatherleigh

Suburb snapshot

Population

25

Median Age

31 years

Median Income

$1,937 /week

Owner-occupied

125%

Recommended filters for German Creek

Products matched to your water profile

Our top pick
iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

iSpring

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

Premium Matched to German Creek's water

Ideal for German Creek — reduces hardness from 257 mg/L, removes chlorine taste and odour.

AO Smith Whole House Salt Free Water Descaler Single-Stage 600,000 Gallon

AO Smith

Salt-Free Whole House Descaler (6yr / 600,000 Gal)

4.3 · 1,517 ratings on Amazon

Premium Matched to German Creek's water

Ideal for German Creek — helps reduce limescale buildup from hard water (257 mg/L) without removing hardness minerals.

Nakii Water Filter Pitcher with WQA certification

Nakii

Water Filter Pitcher (WQA Certified, 150 Gallons)

4.4 · 6,827 ratings on Amazon

Budget-friendly Matched to German Creek's water

Ideal for German Creek — removes chlorine taste and odour.

How German Creek compares

Compared to South Australia and national averages

Metric German Creek SA Avg National Avg
Hardness 257 mg/L 119.3 mg/L 85.1 mg/L
pH 0.05 3.2 8.4
Fluoride 0.2 mg/L 0.5 mg/L 0.7 mg/L
Chlorine 1 mg/L
Turbidity 0.1 NTU 0.1 NTU 0.4 NTU
TDS 674 mg/L 341.5 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 325 mg/L No limit Measured
Aluminium 0.002 mg/L < 0.2 Good
Calcium 75.2 mg/L No limit Measured
Chloride 171 mg/L < 250 Good
Free Chlorine 1 mg/L < 5 Good
Total Chlorine 0.8 mg/L < 5 Good
Colour 1 HU < 15 Good
Copper 0.0521 mg/L < 2 Good
E. coli 0 cfu/100mL < 0 Compliant
Fluoride 0.2 mg/L < 1.5 Good
Hardness 257 PPM or mg/L < 200 Exceeds
Iron 0.0629 mg/L < 0.3 Good
Lead 0.0022 mg/L < 0.01 Good
Magnesium 16.9 mg/L No limit Measured
Manganese 0.001 mg/L < 0.1 Good
Nitrate 0.07 mg/L < 50 Good
pH 0.05 µg/L 6.5 – 8.5 Outside range
Sodium 123 mg/L < 180 Good
Sulfate 21.9 mg/L < 500 Good
Total Dissolved Solids 674 mg/L < 600 Exceeds
Turbidity 0.1 NTU < 5 Good

Safety assessment

Of 21 parameters tested, several exceed Australian Drinking Water Guidelines: Hardness (257 PPM or mg/L), pH (0.05 µg/L), Total Dissolved Solids (674 mg/L). E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Very hard (257 mg/L)

Water Hardness

Your water is very hard, meaning significant limescale buildup is likely on appliances, fixtures, and heating elements. Soap will struggle to lather, and you may notice dry skin or dull hair after washing. Regular descaling of kettles, dishwashers, and hot water systems is strongly recommended.

Outside Range

pH Level

pH of 0.05 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.2 mg/L. Below the recommended range.

Chlorine

Disinfection

Chlorine measured at 1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in German Creek measures 1 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Descale Appliances Regularly

With very hard water at 257 mg/L, descale your kettle, showerhead, and hot water system every few months using white vinegar to maintain efficiency.

Fluoride in Your Water

Fluoride measures 0.2 mg/L in German Creek. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Consider a Filter for TDS

Total dissolved solids measure 674 mg/L. A reverse osmosis filter can reduce dissolved minerals if you prefer a cleaner taste in drinking water.

Slightly Acidic Water

pH measures 0.05 in German Creek, which is slightly acidic. Running the tap for 30 seconds before drinking can flush any metals that dissolve more readily in acidic water.

Get water quality alerts

We'll email you when German Creek's water data is updated.

Frequently asked questions

Is tap water safe to drink in German Creek?
Yes, tap water in German Creek is generally safe to drink. It scores 8.8 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by SA Water. Of 21 parameters tested, several exceed Australian Drinking Water Guidelines: Hardness (257 PPM or mg/L), pH (0.05 µg/L), Total Dissolved Solids (674 mg/L). E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in German Creek?
Water hardness in German Creek is 257 mg/L, classified as very hard. Your water is very hard, meaning significant limescale buildup is likely on appliances, fixtures, and heating elements. Soap will struggle to lather, and you may notice dry skin or dull hair after washing. Regular descaling of kettles, dishwashers, and hot water systems is strongly recommended.
What water utility supplies German Creek?
German Creek is supplied by SA Water.
Does German Creek water have fluoride?
Yes, water in German Creek is fluoridated, with a fluoride level of 0.2 mg/L. This is below the recommended range of 0.6–1.1 mg/L.
What is the water quality score for German Creek?
German Creek has a WaterScore of 8.8 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of German Creek?
The population of German Creek, SA is 25 according to the 2021 Australian Census. The median age of residents is 31 years.

Water utility

Utility
SA Water
Supply Zone
Beachport
Data Source
SA Water — water quality performance results november 2025

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 7.8 and 9.8

Utility reports average the grid — not your home

German Creek's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Adelaide and SA

In-depth articles on the water supply that serves German Creek

Explore more

Related pages for German Creek, SA

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

Very hard · 257 mg/L — scale damage

iSpring · ★ 4.6 on Amazon

Stop the scale →