Tap Water Quality in Hatherleigh, SA
Postcode 5280 · Supplied by SA Water via Beachport
Quality Score
About Hatherleigh
Hatherleigh is a suburb of 154 residents in South Australia (postcode 5280). The median age is 53. It falls within the SA Water area. Neighbouring suburbs include Clay Wells, Furner, German Creek, Kangaroo Inn.
Most residents own outright (47%), while 37% own their home with a mortgage, while 20% rent. The median household income is $68,224 per year. The top countries of birth for residents are United Kingdom (91%).
Tap water in Hatherleigh is supplied by SA Water. The suburb receives water via the Beachport supply zone.
Water quality summary
Based on 2025 water quality reports, Hatherleigh achieves a WaterScore of 8.8 out of 10, rated excellent overall. Water hardness measures 257 mg/L, classified as very hard. Residents may notice limescale buildup on appliances and fixtures. The pH level is 0.05, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.2 mg/L, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 674 mg/L, considered elevated against the ADWG guideline of 600 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Clay Wells , Furner , German Creek
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
257/200 mg/L
115% above South Australia avg
202% above national avg
Recommended filters for Hatherleigh
Products matched to your water profile
iSpring
RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)
4.6 · 13,756 ratings on Amazon
Ideal for Hatherleigh — reduces hardness from 257 mg/L, removes chlorine taste and odour.
YARNA
Capacitive Electronic Water Descaler (Whole House)
4 · 538 ratings on Amazon
Ideal for Hatherleigh — helps reduce limescale buildup from hard water (257 mg/L) without removing hardness minerals.
Nakii
Water Filter Pitcher (WQA Certified, 150 Gallons)
4.4 · 6,827 ratings on Amazon
Ideal for Hatherleigh — removes chlorine taste and odour.
Comparison
How Hatherleigh compares
Compared to South Australia and national averages
| Metric | Hatherleigh | SA Avg | National Avg |
|---|---|---|---|
| Hardness | 257 mg/L | 119.3 mg/L | 85.1 mg/L |
| pH | 0.05 | 3.2 | 8.4 |
| Fluoride | 0.2 mg/L | 0.5 mg/L | 0.7 mg/L |
| Chlorine | 1 mg/L | — | — |
| Turbidity | 0.1 NTU | 0.1 NTU | 0.4 NTU |
| TDS | 674 mg/L | 341.5 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 325 | mg/L | No limit | Measured |
| Aluminium | 0.002 | mg/L | < 0.2 | Good |
| Calcium | 75.2 | mg/L | No limit | Measured |
| Chloride | 171 | mg/L | < 250 | Good |
| Free Chlorine | 1 | mg/L | < 5 | Good |
| Total Chlorine | 0.8 | mg/L | < 5 | Good |
| Colour | 1 | HU | < 15 | Good |
| Copper | 0.0521 | mg/L | < 2 | Good |
| E. coli | 0 | cfu/100mL | < 0 | Compliant |
| Fluoride | 0.2 | mg/L | < 1.5 | Good |
| Hardness | 257 | PPM or mg/L | < 200 | Exceeds |
| Iron | 0.0629 | mg/L | < 0.3 | Good |
| Lead | 0.0022 | mg/L | < 0.01 | Good |
| Magnesium | 16.9 | mg/L | No limit | Measured |
| Manganese | 0.001 | mg/L | < 0.1 | Good |
| Nitrate | 0.07 | mg/L | < 50 | Good |
| pH | 0.05 | µg/L | 6.5 – 8.5 | Outside range |
| Sodium | 123 | mg/L | < 180 | Good |
| Sulfate | 21.9 | mg/L | < 500 | Good |
| Total Dissolved Solids | 674 | mg/L | < 600 | Exceeds |
| Turbidity | 0.1 | NTU | < 5 | Good |
Safety
Safety assessment
Of 21 parameters tested, several exceed Australian Drinking Water Guidelines: Hardness (257 PPM or mg/L), pH (0.05 µg/L), Total Dissolved Solids (674 mg/L). E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Very hard (257 mg/L)
Water Hardness
Your water is very hard, meaning significant limescale buildup is likely on appliances, fixtures, and heating elements. Soap will struggle to lather, and you may notice dry skin or dull hair after washing. Regular descaling of kettles, dishwashers, and hot water systems is strongly recommended.
Outside Range
pH Level
pH of 0.05 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.2 mg/L. Below the recommended range.
Chlorine
Disinfection
Chlorine measured at 1 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Hatherleigh measures 1 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Descale Appliances Regularly
With very hard water at 257 mg/L, descale your kettle, showerhead, and hot water system every few months using white vinegar to maintain efficiency.
Fluoride in Your Water
Fluoride measures 0.2 mg/L in Hatherleigh. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Consider a Filter for TDS
Total dissolved solids measure 674 mg/L. A reverse osmosis filter can reduce dissolved minerals if you prefer a cleaner taste in drinking water.
Slightly Acidic Water
pH measures 0.05 in Hatherleigh, which is slightly acidic. Running the tap for 30 seconds before drinking can flush any metals that dissolve more readily in acidic water.
Get water quality alerts
We'll email you when Hatherleigh's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Hatherleigh?
How hard is the water in Hatherleigh?
What water utility supplies Hatherleigh?
Does Hatherleigh water have fluoride?
What is the water quality score for Hatherleigh?
What is the population of Hatherleigh?
Supplier
Water utility
- Utility
- SA Water
- Supply Zone
- Beachport
- Data Source
- SA Water — water quality performance results november 2025
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 7.8 and 9.8
Utility reports average the grid — not your home
Hatherleigh's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Adelaide and SA
In-depth articles on the water supply that serves Hatherleigh
Related
Explore more
Related pages for Hatherleigh, SA
Is tap water safe?
Safety assessment
Water hardness
257 mg/L
Best water filter
Filter recommendations
South Australia water quality
State coverage
SA Water
Water utility
Compare with Clay Wells
Hatherleigh vs Clay Wells
Compare with Furner
Hatherleigh vs Furner
Compare with German Creek
Hatherleigh vs German Creek
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.