Tap Water Quality in Mount Victoria, NSW
Postcode 2786 · Supplied by Sydney Water via Cascade
Quality Score
About Mount Victoria
Mount Victoria is a suburb of 945 residents in New South Wales (postcode 2786). The median age is 49. It falls within the Sydney Water area. Neighbouring suburbs include Blackheath, Bell, Dargan, Mount Irvine.
Most residents own outright (47%), while 35% own their home with a mortgage, while 17% rent. The median household income is $62,244 per year. The top countries of birth for residents are United Kingdom (39%), New Zealand (14%), and Germany (4%).
Tap water in Mount Victoria is supplied by Sydney Water. The suburb receives water via the Cascade supply zone.
Water quality summary
Based on 2024-25 water quality reports, Mount Victoria achieves a WaterScore of 9.7 out of 10, rated excellent overall. Water hardness measures 38.1 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.7, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 1.04 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.06 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 92.5 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.17 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Blackheath , Bell , Dargan
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Mount Victoria
Products matched to your water profile
ZeroWater
2.8L 5-Stage Jug (IAPMO Certified: PFOA/PFOS + Lead)
4.2 · 5,315 ratings on Amazon
Ideal for Mount Victoria — removes fluoride (currently 1.04 mg/L).
Geekpure
5-Stage Under-Sink RO (75 GPD)
4.4 · 400 ratings on Amazon
Ideal for Mount Victoria — removes fluoride (currently 1.04 mg/L), removes chlorine taste and odour.
iSpring
Counter-top Drinking Water Filter
4.4 · 1,108 ratings on Amazon
Ideal for Mount Victoria — removes chlorine taste and odour.
Comparison
How Mount Victoria compares
Compared to New South Wales and national averages
| Metric | Mount Victoria | NSW Avg | National Avg |
|---|---|---|---|
| Hardness | 38.1 mg/L | 45.9 mg/L | 85.3 mg/L |
| pH | 7.7 | 7.7 | 7.8 |
| Fluoride | 1.04 mg/L | 1 mg/L | 0.7 mg/L |
| Chlorine | 1.06 mg/L | — | — |
| Turbidity | 0.17 NTU | 0.2 NTU | 0.4 NTU |
| TDS | 92.5 mg/L | 116.3 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Iron | 0.016 | mg/L | < 0.3 | Good |
| Aluminium | 0.017 | mg/L | < 0.2 | Good |
| Manganese | 0.0031 | mg/L | < 0.1 | Good |
| Copper | 0.014 | mg/L | < 2 | Good |
| Zinc | 0.005 | mg/L | No limit | Measured |
| Ammonia | 0.001 | mg/L | No limit | Measured |
| Turbidity | 0.17 | NTU | < 5 | Good |
| Colour | 2 | HU | < 15 | Good |
| Dissolved Oxygen | 87.9 | % saturation | No limit | Measured |
| Total Dissolved Solids | 92.5 | mg/L | < 600 | Good |
| Sulfate | 0.9 | mg/L | < 500 | Good |
| Hardness | 38.1 | mg/L | < 200 | Good |
| pH | 7.7 | pH units | 6.5 – 8.5 | Normal |
| Temperature | 16.1 | degrees C | No limit | Measured |
| E. coli | 0 | orgs/100 mL | < 0 | Compliant |
| Free Chlorine | 1.06 | mg/L | < 5 | Good |
| Monochloramine | 0.07 | mg/L | < 3 | Good |
| Fluoride | 1.04 | mg/L | < 1.5 | Good |
| Trihalomethanes | 0.03 | mg/L | < 0.25 | Good |
| Ndma | 0.0001 | mg/L | No limit | Measured |
| Chloride | 0.004 | mg/L | < 250 | Good |
| PFOS + PFHxS | 0.0026 | µg/L | PFOS < 0.008, PFHxS < 0.03 | Good |
| PFOA | 0.0001 | µg/L | < 0.2 | Good |
Safety
Safety assessment
Based on 23 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (38.1 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.7 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 1.04 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 1.06 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Reduce Chlorine Taste
Mount Victoria's chlorine level is 1.06 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.
Soft Water Advantage
Mount Victoria's water is soft at 38.1 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 1.04 mg/L in Mount Victoria. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Mount Victoria's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Mount Victoria?
How hard is the water in Mount Victoria?
What water utility supplies Mount Victoria?
Does Mount Victoria water have fluoride?
What is the water quality score for Mount Victoria?
What is the population of Mount Victoria?
Supplier
Water utility
- Utility
- Sydney Water
- Supply Zone
- Cascade
- Data Source
- Sydney Water — quarterly cascade q2 202425, quarterly cascade q3 202425, quarterly cascade q4 202425
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.7 and 10.0
Utility reports average the grid — not your home
Mount Victoria's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Sydney
In-depth articles on the water supply that serves Mount Victoria
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Mount Victoria, NSW [Data set]. Compiled from Sydney Water data (2024-25 annual report). https://waterscore.com.au/water-quality/mount-victoria-nsw/
Embed
Add Mount Victoria, NSW water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Mount Victoria, NSW
Is tap water safe?
Safety assessment
Water hardness
38.1 mg/L
Best water filter
Filter recommendations
New South Wales water quality
State coverage
Sydney Water
Water utility
Compare with Blackheath
Mount Victoria vs Blackheath
Compare with Bell
Mount Victoria vs Bell
Compare with Dargan
Mount Victoria vs Dargan
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Sydney Water (2024-25 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.
