As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Pine Creek, NT

Postcode 0847 · Supplied by Power and Water Corporation via Pine Creek

Current data · 2024 report

Quality Score

Share this page Twitter Facebook LinkedIn

About Pine Creek

Pine Creek is a suburb of 318 residents in Northern Territory (postcode 0847). The median age is 36. It falls within the Power and Water Corporation area. Neighbouring suburbs include Cossack, Emungalan, Katherine, Katherine South.

Most residents rent (48%), while 31% own outright, while 14% own their home with a mortgage. The median household income is $58,500 per year. The top countries of birth for residents are New Zealand (33%), Indonesia (18%), and China (10%).

Tap water in Pine Creek is supplied by Power and Water Corporation. The suburb receives water via the Pine Creek supply zone.

Water quality summary

Based on 2024 water quality reports, Pine Creek achieves a WaterScore of 9.4 out of 10, rated excellent overall. Water hardness measures 102 mg/L, classified as moderately hard. This may cause light mineral deposits on fixtures over time. The pH level is 7, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.58 mg/L, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 2 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 7 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 1.2 NTU, within the ADWG guideline of 5 NTU.

Compare with nearby suburbs: Cossack , Emungalan , Katherine

Suburb snapshot

Population

318

Median Age

36 years

Median Income

$1,125 /week

Owner-occupied

45%

Recommended filters for Pine Creek

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Pine Creek's water

Ideal for Pine Creek — removes chlorine taste and odour.

ZeroWater 23 Cup Dispenser with TDS Meter

ZeroWater

23-Cup Dispenser (incl. TDS Meter)

4.3 · 27,123 ratings on Amazon

Budget-friendly Matched to Pine Creek's water

A reliable 23-cup dispenser (incl. tds meter) suitable for Pine Creek's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Pine Creek's water

Ideal for Pine Creek — removes chlorine taste and odour.

How Pine Creek compares

Compared to Northern Territory and national averages

Metric Pine Creek NT Avg National Avg
Hardness 102 mg/L 103.9 mg/L 85.1 mg/L
pH 7 7.3 8.4
Fluoride 0.58 mg/L 0.6 mg/L 0.7 mg/L
Chlorine 2 mg/L
Turbidity 1.2 NTU 1.2 NTU 0.4 NTU
TDS 7 mg/L 35.5 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Total Chlorine 2 mg/L < 5 Good
Copper 0.1 mg/L < 2 Good
Fluoride 0.58 mg/L < 1.5 Good
Aluminium 0.02 mg/L < 0.2 Good
Chloride 11 mg/L < 250 Good
Free Chlorine 1.2 mg/L < 5 Good
Colour 2 HU < 15 Good
Hardness 102 mg/L CaCO3 < 200 Good
Iron 0.01 mg/L < 0.3 Good
Manganese 0.015 mg/L < 0.1 Good
pH 7 pH units 6.5 – 8.5 Normal
Sulfate 0.003 mg/L < 500 Good
Total Dissolved Solids 7 mg/L < 600 Good
Turbidity 1.2 NTU < 5 Good
Zinc 0.023 mg/L No limit Measured
Alkalinity 96 mg/L CaCO3 No limit Measured
Calcium 0.018 mg/L No limit Measured
Conductivity 7 µS/cm No limit Measured
Magnesium 48 mg/L No limit Measured

Safety assessment

Based on 19 parameters tested, all results fall within Australian Drinking Water Guidelines.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Moderately hard (102 mg/L)

Water Hardness

Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.

Normal Range

pH Level

pH of 7 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.58 mg/L. Below the recommended range.

Chlorine

Disinfection

Chlorine measured at 2 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Reduce Chlorine Taste

Pine Creek's chlorine level is 2 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.

Soft Water Advantage

Pine Creek's water is moderately hard at 102 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 0.58 mg/L in Pine Creek. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Sediment Filtration

Turbidity is 1.2 NTU in Pine Creek. A sediment pre-filter on your main line can help reduce fine particles and improve water clarity at the tap.

Get water quality alerts

We'll email you when Pine Creek's water data is updated.

Frequently asked questions

Is tap water safe to drink in Pine Creek?
Yes, tap water in Pine Creek is generally safe to drink. It scores 9.4 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by Power and Water Corporation. Based on 19 parameters tested, all results fall within Australian Drinking Water Guidelines.
How hard is the water in Pine Creek?
Water hardness in Pine Creek is 102 mg/L, classified as moderately hard. Your water is moderately hard. You may notice light limescale deposits on kettle elements and taps over time. Soap lathers reasonably well, though slightly more product may be needed. Skin and hair are generally unaffected, and appliance lifespan should not be significantly reduced at this level.
What water utility supplies Pine Creek?
Pine Creek is supplied by Power and Water Corporation.
Does Pine Creek water have fluoride?
Yes, water in Pine Creek is fluoridated, with a fluoride level of 0.58 mg/L. This is below the recommended range of 0.6–1.1 mg/L.
What is the water quality score for Pine Creek?
Pine Creek has a WaterScore of 9.4 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Pine Creek?
The population of Pine Creek, NT is 318 according to the 2021 Australian Census. The median age of residents is 36 years.

Water utility

Supply Zone
Pine Creek
Data Source
Power and Water Corporation — 2017 Power and Water Corporation Drinking Water Quality Report, Drinking Water Quality Report 2019 WEB, 2024 Power and Water Drinking Water Quality Report

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 8.4 and 10.0

Utility reports average the grid — not your home

Pine Creek's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Darwin and the NT

In-depth articles on the water supply that serves Pine Creek

Explore more

Related pages for Pine Creek, NT

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Power and Water Corporation (2024 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

BRITA Marella 2.4L Fridge Water Filter Jug

Chlorine · 2 mg/L — pool taste

BRITA · ★ 4.7 on Amazon

Kill the taste →