Tap Water Quality in Wattle Grove, NSW
Postcode 2173 · Supplied by Sydney Water via Prospect South
Quality Score
About Wattle Grove
Wattle Grove is a suburb of 8,886 residents in New South Wales (postcode 2173). The median age is 35. It falls within the Sydney Water area. Neighbouring suburbs include Kentlyn, Ruse, Glenquarie, Macquarie Fields.
Most residents own their home with a mortgage (43%), while 29% rent, while 26% own outright. The median household income is $127,868 per year. The top countries of birth for residents are India (14%), Egypt (11%), and Philippines (7%).
Tap water in Wattle Grove is supplied by Sydney Water. The suburb receives water via the Prospect South supply zone.
Water quality summary
Based on 2024-25 water quality reports, Wattle Grove achieves a WaterScore of 9.5 out of 10, rated excellent overall. Water hardness measures 50.7 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.9, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 1.01 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.04 mg/L — well within the ADWG guideline of 5 mg/L. Total dissolved solids (TDS) measure 137 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.12 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Kentlyn , Ruse , Glenquarie
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Wattle Grove
Products matched to your water profile
ZeroWater
2.8L 5-Stage Jug (IAPMO Certified: PFOA/PFOS + Lead)
4.2 · 5,315 ratings on Amazon
Ideal for Wattle Grove — removes fluoride (currently 1.01 mg/L).
iSpring
RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)
4.6 · 13,756 ratings on Amazon
Ideal for Wattle Grove — removes fluoride (currently 1.01 mg/L).
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
A reliable 8.5l stainless steel gravity system suitable for Wattle Grove's water profile.
Comparison
How Wattle Grove compares
Compared to New South Wales and national averages
| Metric | Wattle Grove | NSW Avg | National Avg |
|---|---|---|---|
| Hardness | 50.7 mg/L | 45.9 mg/L | 85.1 mg/L |
| pH | 7.9 | 7.7 | 8.4 |
| Fluoride | 1.01 mg/L | 1 mg/L | 0.7 mg/L |
| Chlorine | 0.04 mg/L | — | — |
| Turbidity | 0.12 NTU | 0.2 NTU | 0.4 NTU |
| TDS | 137 mg/L | 116.3 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Iron | 0.007 | mg/L | < 0.3 | Good |
| Aluminium | 0.014 | mg/L | < 0.2 | Good |
| Manganese | 0.0018 | mg/L | < 0.1 | Good |
| Copper | 0.015 | mg/L | < 2 | Good |
| Zinc | 0.003 | mg/L | No limit | Measured |
| Ammonia | 0.354 | mg/L | No limit | Measured |
| Turbidity | 0.12 | NTU | < 5 | Good |
| Colour | 4 | HU | < 15 | Good |
| Dissolved Oxygen | 105.1 | % saturation | No limit | Measured |
| Total Dissolved Solids | 137 | mg/L | < 600 | Good |
| Sulfate | 8.8 | mg/L | < 500 | Good |
| Hardness | 50.7 | mg/L | < 200 | Good |
| pH | 7.9 | pH units | 6.5 – 8.5 | Normal |
| Temperature | 19.3 | degrees C | No limit | Measured |
| E. coli | 0 | orgs/100 mL | < 0 | Compliant |
| Free Chlorine | 0.04 | mg/L | < 5 | Good |
| Monochloramine | 1.74 | mg/L | < 3 | Good |
| Fluoride | 1.01 | mg/L | < 1.5 | Good |
| Trihalomethanes | 0.09 | mg/L | < 0.25 | Good |
| Ndma | 0.0001 | mg/L | No limit | Measured |
| Chloride | 0.004 | mg/L | < 250 | Good |
| PFOS + PFHxS | 0.0014 | µg/L | PFOS < 0.008, PFHxS < 0.03 | Good |
| PFOA | 0.0002 | µg/L | < 0.2 | Good |
Safety
Safety assessment
Based on 23 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (50.7 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.9 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 1.01 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 0.04 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Wattle Grove measures 0.04 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Wattle Grove's water is soft at 50.7 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 1.01 mg/L in Wattle Grove. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Wattle Grove's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Wattle Grove?
How hard is the water in Wattle Grove?
What water utility supplies Wattle Grove?
Does Wattle Grove water have fluoride?
What is the water quality score for Wattle Grove?
What is the population of Wattle Grove?
Supplier
Water utility
- Utility
- Sydney Water
- Supply Zone
- Prospect South
- Data Source
- Sydney Water — quarterly prospect south q2 202425, quarterly prospect south q3 202425, quarterly prospect south q4 202425
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.5 and 10.0
Utility reports average the grid — not your home
Wattle Grove's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Sydney
In-depth articles on the water supply that serves Wattle Grove
Related
Explore more
Related pages for Wattle Grove, NSW
Is tap water safe?
Safety assessment
Water hardness
50.7 mg/L
Best water filter
Filter recommendations
New South Wales water quality
State coverage
Sydney Water
Water utility
Compare with Kentlyn
Wattle Grove vs Kentlyn
Compare with Ruse
Wattle Grove vs Ruse
Compare with Glenquarie
Wattle Grove vs Glenquarie
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Sydney Water (2024-25 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.