As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Wrattonbully, SA

Postcode 5271 · Supplied by SA Water via Naracoorte

Current data · 2025 report

Quality Score

Share this page Twitter Facebook LinkedIn

About Wrattonbully

Wrattonbully is a suburb of 41 residents in South Australia (postcode 5271). The median age is 51. It falls within the SA Water area. Neighbouring suburbs include Bool Lagoon, Keppoch, Marcollat, Spence.

Most residents own outright (38%), while 19% rent, while 0% own their home with a mortgage. The median household income is $84,500 per year.

Tap water in Wrattonbully is supplied by SA Water. The suburb receives water via the Naracoorte supply zone.

Water quality summary

Based on 2025 water quality reports, Wrattonbully achieves a WaterScore of 7.5 out of 10, rated good overall. Water hardness measures 355 mg/L, classified as very hard. Residents may notice limescale buildup on appliances and fixtures. The pH level is 0.05, which is outside the ADWG guideline range of 6.5–8.5. The water is fluoridated at 1.1 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.9 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Turbidity is 0.48 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Compare with nearby suburbs: Bool Lagoon , Keppoch , Marcollat

Suburb snapshot

Population

41

Median Age

51 years

Median Income

$1,625 /week

Owner-occupied

38%

Recommended filters for Wrattonbully

Products matched to your water profile

Our top pick
iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

iSpring

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

Premium Matched to Wrattonbully's water

Ideal for Wrattonbully — reduces hardness from 355 mg/L, removes fluoride (currently 1.1 mg/L), removes chlorine taste and odour.

YARNA Capacitive Electronic Water Descaler Whole House System

YARNA

Capacitive Electronic Water Descaler (Whole House)

4 · 538 ratings on Amazon

Mid-range Matched to Wrattonbully's water

Ideal for Wrattonbully — helps reduce limescale buildup from hard water (355 mg/L) without removing hardness minerals.

ZeroWater 2.8L 5-Stage Water Filter Jug with TDS Meter

ZeroWater

2.8L 5-Stage Jug (PFAS + Fluoride + Lead, IAPMO Certified)

4.2 · 5,315 ratings on Amazon

Budget-friendly Matched to Wrattonbully's water

Ideal for Wrattonbully — removes fluoride (currently 1.1 mg/L).

How Wrattonbully compares

Compared to South Australia and national averages

Metric Wrattonbully SA Avg National Avg
Hardness 355 mg/L 119.3 mg/L 85.1 mg/L
pH 0.05 3.2 8.4
Fluoride 1.1 mg/L 0.5 mg/L 0.7 mg/L
Chlorine 0.9 mg/L
Turbidity 0.48 NTU 0.1 NTU 0.4 NTU
TDS 341.5 mg/L 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Alkalinity 317 mg/L No limit Measured
Aluminium 0.001 mg/L < 0.2 Good
Calcium 61.2 mg/L No limit Measured
Chloride 458 mg/L < 250 Exceeds
Free Chlorine 0.9 mg/L < 5 Good
Colour 1 HU < 15 Good
Copper 0.2176 mg/L < 2 Good
E. coli 0 cfu/100mL < 0 Compliant
Fluoride 1.1 mg/L < 1.5 Good
Hardness 355 PPM or mg/L < 200 Exceeds
Iron 0.103 mg/L < 0.3 Good
Lead 0.0006 mg/L < 0.01 Good
Magnesium 49.1 mg/L No limit Measured
Manganese 0.0233 mg/L < 0.1 Good
Nitrate 0.12 mg/L < 50 Good
pH 0.05 µg/L 6.5 – 8.5 Outside range
Sodium 326 mg/L < 180 Exceeds
Sulfate 129.8 mg/L < 500 Good
Turbidity 0.48 NTU < 5 Good

Safety assessment

Of 19 parameters tested, several exceed Australian Drinking Water Guidelines: Chloride (458 mg/L), Hardness (355 PPM or mg/L), pH (0.05 µg/L), Sodium (326 mg/L). E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Very hard (355 mg/L)

Water Hardness

Your water is very hard, meaning significant limescale buildup is likely on appliances, fixtures, and heating elements. Soap will struggle to lather, and you may notice dry skin or dull hair after washing. Regular descaling of kettles, dishwashers, and hot water systems is strongly recommended.

Outside Range

pH Level

pH of 0.05 is outside the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 1.1 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 0.9 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in Wrattonbully measures 0.9 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Descale Appliances Regularly

With very hard water at 355 mg/L, descale your kettle, showerhead, and hot water system every few months using white vinegar to maintain efficiency.

Fluoride in Your Water

Fluoride measures 1.1 mg/L in Wrattonbully. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Slightly Acidic Water

pH measures 0.05 in Wrattonbully, which is slightly acidic. Running the tap for 30 seconds before drinking can flush any metals that dissolve more readily in acidic water.

Get water quality alerts

We'll email you when Wrattonbully's water data is updated.

Frequently asked questions

Is tap water safe to drink in Wrattonbully?
Yes, tap water in Wrattonbully is generally safe to drink. It scores 7.5 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by SA Water. Of 19 parameters tested, several exceed Australian Drinking Water Guidelines: Chloride (458 mg/L), Hardness (355 PPM or mg/L), pH (0.05 µg/L), Sodium (326 mg/L). E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Wrattonbully?
Water hardness in Wrattonbully is 355 mg/L, classified as very hard. Your water is very hard, meaning significant limescale buildup is likely on appliances, fixtures, and heating elements. Soap will struggle to lather, and you may notice dry skin or dull hair after washing. Regular descaling of kettles, dishwashers, and hot water systems is strongly recommended.
What water utility supplies Wrattonbully?
Wrattonbully is supplied by SA Water.
Does Wrattonbully water have fluoride?
Yes, water in Wrattonbully is fluoridated, with a fluoride level of 1.1 mg/L. This is within the recommended range for dental health.
What is the water quality score for Wrattonbully?
Wrattonbully has a WaterScore of 7.5 out of 10, rated good. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.
What is the population of Wrattonbully?
The population of Wrattonbully, SA is 41 according to the 2021 Australian Census. The median age of residents is 51 years.

Water utility

Utility
SA Water
Supply Zone
Naracoorte
Data Source
SA Water — water quality performance results november 2025

Nearby suburbs

Same water utility, similar water quality

Suburbs with similar water quality

Suburbs scoring between 6.5 and 8.5

Utility reports average the grid — not your home

Wrattonbully's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Guides for Adelaide and SA

In-depth articles on the water supply that serves Wrattonbully

Explore more

Related pages for Wrattonbully, SA

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from SA Water (2025 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

iSpring RCC7AK 6-Stage Under-Sink RO System with Alkaline Remineralization

Very hard · 355 mg/L — scale damage

iSpring · ★ 4.6 on Amazon

Stop the scale →