Tap Water Quality in Faulconbridge, NSW
Postcode 2776 · Supplied by Sydney Water via Cascade
Quality Score
About Faulconbridge
Faulconbridge is a suburb of 4,156 residents in New South Wales (postcode 2776). The median age is 40. It falls within the Sydney Water area. Neighbouring suburbs include Springwood, Valley Heights, Hawkesbury Heights, Sun Valley.
Most residents own their home with a mortgage (48%), while 37% own outright, while 13% rent. The median household income is $111,904 per year. The top countries of birth for residents are United Kingdom (41%), New Zealand (10%), and United States (4%).
Tap water in Faulconbridge is supplied by Sydney Water. The suburb receives water via the Cascade supply zone.
Water quality summary
Based on 2024-25 water quality reports, Faulconbridge achieves a WaterScore of 9.7 out of 10, rated excellent overall. Water hardness measures 38.1 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.7, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 1.04 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.06 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Total dissolved solids (TDS) measure 92.5 mg/L, considered low against the ADWG guideline of 600 mg/L. Turbidity is 0.17 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Springwood , Valley Heights , Hawkesbury Heights
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Faulconbridge
Products matched to your water profile
ZeroWater
2.8L 5-Stage Jug (IAPMO Certified: PFOA/PFOS + Lead)
4.2 · 5,315 ratings on Amazon
Ideal for Faulconbridge — removes fluoride (currently 1.04 mg/L).
Geekpure
5-Stage Under-Sink RO (75 GPD)
4.4 · 400 ratings on Amazon
Ideal for Faulconbridge — removes fluoride (currently 1.04 mg/L), removes chlorine taste and odour.
Nakii
Water Filter Pitcher (150 Gallons)
4.4 · 6,827 ratings on Amazon
Ideal for Faulconbridge — removes chlorine taste and odour.
Comparison
How Faulconbridge compares
Compared to New South Wales and national averages
| Metric | Faulconbridge | NSW Avg | National Avg |
|---|---|---|---|
| Hardness | 38.1 mg/L | 45.9 mg/L | 80.3 mg/L |
| pH | 7.7 | 7.7 | 7.8 |
| Fluoride | 1.04 mg/L | 1 mg/L | 0.7 mg/L |
| Chlorine | 1.06 mg/L | — | — |
| Turbidity | 0.17 NTU | 0.2 NTU | 0.4 NTU |
| TDS | 92.5 mg/L | 116.3 mg/L | 267.4 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Iron | 0.016 | mg/L | < 0.3 | Good |
| Aluminium | 0.017 | mg/L | < 0.2 | Good |
| Manganese | 0.0031 | mg/L | < 0.1 | Good |
| Copper | 0.014 | mg/L | < 2 | Good |
| Zinc | 0.005 | mg/L | No limit | Measured |
| Ammonia | 0.001 | mg/L | No limit | Measured |
| Turbidity | 0.17 | NTU | < 5 | Good |
| Colour | 2 | HU | < 15 | Good |
| Dissolved Oxygen | 87.9 | % saturation | No limit | Measured |
| Total Dissolved Solids | 92.5 | mg/L | < 600 | Good |
| Sulfate | 0.9 | mg/L | < 500 | Good |
| Hardness | 38.1 | mg/L | < 200 | Good |
| pH | 7.7 | pH units | 6.5 – 8.5 | Normal |
| Temperature | 16.1 | degrees C | No limit | Measured |
| E. coli | 0 | orgs/100 mL | < 0 | Compliant |
| Free Chlorine | 1.06 | mg/L | < 5 | Good |
| Monochloramine | 0.07 | mg/L | < 3 | Good |
| Fluoride | 1.04 | mg/L | < 1.5 | Good |
| Trihalomethanes | 0.03 | mg/L | < 0.25 | Good |
| Ndma | 0.0001 | mg/L | No limit | Measured |
| Chloride | 0.004 | mg/L | < 250 | Good |
| PFOS + PFHxS | 0.0026 | µg/L | PFOS < 0.008, PFHxS < 0.03 | Good |
| PFOA | 0.0001 | µg/L | < 0.2 | Good |
Safety
Safety assessment
Based on 23 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (38.1 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.7 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 1.04 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 1.06 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Reduce Chlorine Taste
Faulconbridge's chlorine level is 1.06 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.
Soft Water Advantage
Faulconbridge's water is soft at 38.1 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 1.04 mg/L in Faulconbridge. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Faulconbridge's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Faulconbridge?
How hard is the water in Faulconbridge?
What water utility supplies Faulconbridge?
Does Faulconbridge water have fluoride?
What is the water quality score for Faulconbridge?
What is the population of Faulconbridge?
Supplier
Water utility
- Utility
- Sydney Water
- Supply Zone
- Cascade
- Data Source
- Sydney Water — quarterly cascade q2 202425, quarterly cascade q3 202425, quarterly cascade q4 202425
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.7 and 10.0
Utility reports average the grid — not your home
Faulconbridge's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Sydney
In-depth articles on the water supply that serves Faulconbridge
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Faulconbridge, NSW [Data set]. Compiled from Sydney Water data (2024-25 annual report). https://waterscore.com.au/water-quality/faulconbridge-nsw/
Embed
Add Faulconbridge, NSW water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Faulconbridge, NSW
Is tap water safe?
Safety assessment
Water hardness
38.1 mg/L
Best water filter
Filter recommendations
New South Wales water quality
State coverage
Sydney Water
Water utility
Compare with Leonay
Faulconbridge vs Leonay
Compare with Grose Vale
Faulconbridge vs Grose Vale
Compare with Grose Wold
Faulconbridge vs Grose Wold
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Sydney Water (2024-25 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.
